[asterisk-users] Cisco Gateway sending call to * without CID Name

[Sean Dennis]

What ISDN commands do you have under your PRI serial interface?

JR Richardson wrote:
> Hi All,
>
> I have a Cisco 2600 PRI gateway being hosted on an Asterisk server.
> The PRI on the cisco is pointing to a customer legacy PBX, the SIP
> VoIP side of the cisco is pointing to an Asterisk server (1.2.X).
>
> In Asterisk, the SIP peer is setup with callerid="some name"<5551212>
>
> In a SIP call from the cisco to asterisk, there is no CID name info in
> SIP debug, so Asterisk doesn't seem to inject CID name info for that
> SIP Channel on pass through calls.  Asterisk does have the CID number
> and account number and user info and all other variable associated
> with the SIP channel, just no CID name.
>
> When I test with another Asterisk server acting as the PRI gateway,
> the CID name is fine.
>
> 1. in the cisco, does anyone know what the command is to set a CID
> Name for all outbound VoIP calls?
>
> 2. is this a bug in Asterisk that will not inject CID name in a
> channel if it doesn't have CID name coming in first?
>
> Thanks.
>
> JR
>