[asterisk-users] Config help with ISDN Fritzcard
Simon
greminn at gmail.com
Tue Jul 1 19:51:15 CDT 2008
Hi There,
Ive managed to get a AVM ISDN Fritzcard working with debian etch (see
capiinfo output below), and compiled chan_capi and got everything
finished (i think). So i have: Etch + Asterisk + Zaptel + ChanCapi +
Asterisk Addons + Asterisk-GUI and the chan_capi driver is loaded into
asterisk:
asterisk*CLI> module show like capi
Module Description
Use Count
chan_capi.so Common ISDN API Driver (1.1.1) 0
1 modules loaded
Would someone be able to help me with the config to setup the incoming
calls from the ISDN card? I dont know where to start here.
Thanks
Simon
asterisk:~# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-07 (49.23)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
More information about the asterisk-users
mailing list