[asterisk-users] [URGENT] Zap channels fail to load
Louwrens Benadé
louwrens at jasper.co.za
Tue Feb 26 06:05:28 CST 2008
What's your output from 'ztcfg -vv'?
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andres Jimenez
Sent: 26 February 2008 01:06 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] [URGENT] Zap channels fail to load
I forgot to mentio asterisk log this 2 errors:
[Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to get parameters
[Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to register channel '1-15'
Any hint?
Thanks in advance.
Andres
On Tue, Feb 26, 2008 at 10:44 AM, Andres Jimenez <gandresin at gmail.com>
wrote:
> I have spent some time this morning trying to add an Astribank to our
> current Asterisk, but it failed, so I just removed the hardware,
> restore the config files to the original setup and started asterisk.;
>
> I could see that no Zap channels are started so I did load chan_zap.so:
> pbx*CLI> module load chan_zap.so
> [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application:
> Already have an application 'ZapSendKeypadFacility'
> == Parsing '/etc/asterisk/zapata.conf': Found
> [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to
> specify channel 1: Device or resource busy
> [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open
> channel 1: Device or resource busy
> here = 0, tmp->channel = 1, channel = 1
> [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable
> to register channel '1-15'
>
> Fair enough. I did unloaded chan_zap.so (because of the first error)
> and tried again:
>
> pbx*CLI> module load chan_zap.so
> [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application:
> Already have an application 'ZapSendKeypadFacility'
> == Parsing '/etc/asterisk/zapata.conf': Found
> [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to
> specify channel 1: Device or resource busy
> [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open
> channel 1: Device or resource busy
> here = 0, tmp->channel = 1, channel = 1
> [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable
> to register channel '1-15'
>
> It looks like the problem is in the zap card's first channel:
>
> pbx:~# cat /proc/zaptel/1
> Span 1: WCT1/0 "Wildcard TE12xP Card 0" HDB3/CCS
> IRQ misses: 36
>
> 1 WCT1/0/1 Clear (In use)
> 2 WCT1/0/2 Clear
> 3 WCT1/0/3 Clear
> 4 WCT1/0/4 Clear
> 5 WCT1/0/5 Clear
> 6 WCT1/0/6 Clear
> 7 WCT1/0/7 Clear
> 8 WCT1/0/8 Clear
> 9 WCT1/0/9 Clear
> 10 WCT1/0/10 Clear
> 11 WCT1/0/11 Clear
> 12 WCT1/0/12 Clear
> 13 WCT1/0/13 Clear
> 14 WCT1/0/14 Clear
> 15 WCT1/0/15 Clear
> 16 WCT1/0/16 HDLCFCS
> 17 WCT1/0/17 Clear
> 18 WCT1/0/18 Clear
> 19 WCT1/0/19 Clear
> 20 WCT1/0/20 Clear
> 21 WCT1/0/21 Clear
> 22 WCT1/0/22 Clear
> 23 WCT1/0/23 Clear
> 24 WCT1/0/24 Clear
> 25 WCT1/0/25
> 26 WCT1/0/26
> 27 WCT1/0/27
> 28 WCT1/0/28
> 29 WCT1/0/29
> 30 WCT1/0/30
> 31 WCT1/0/31
>
>
> Is there any change any Astribank related stuff can be causing this?
>
> I have ensured that no Astribanks modules are loaded and even rebooted
> the box, but no success.
>
>
> pbx:~# cat /etc/zaptel.conf
> # CRC off
> #
> loadzone = uk
> defaultzone = uk
>
> span=1,1,0,ccs,hdb3
> bchan=1-15
> dchan=16
> bchan=17-24
>
> #or this with crc on
> #
> #loadzone = uk
> #defaultzone = uk
>
> #span=1,1,0,ccs,hdb3,crc4
> #bchan=1-15
> #dchan=16
> #bchan=17-24
>
> pbx:~# cat /etc/asterisk/zapata.conf
> language=en
> internationalprefix = 00
> nationalprefix = 0
> switchtype = euroisdn
> pridialplan = local
> priindication = outofband
> usecallerid = yes
> hidecallerid = no
> callwaiting = yes
> usecallingpres = yes
> callwaitingcallerid = yes
> threewaycalling = yes
> transfer = yes
> cancallforward = yes
> callreturn = yes
> group = 1
> callgroup = 0
> pickupgroup = 0
> immediate = no
> echotraining = yes
> echocancel = yes
> echocancelwhenbridged = no
> facilityenable = yes
> musiconhold = default
> ;overlapdial = yes
> overlapdial = no
> immediate = no
> txgain = -4.0
> rxgain = -4.0
> signalling = pri_cpe
> channel => 1-15
> ;channel => 17-32
> channel => 17-24
> ;toneduration=100
> toneduration=300
> ;relaxdtmf=yes
>
>
>
> Thanks,
>
> --
> Andres Jimenez
>
> GPG : http://www.andresin.com/gpg/gandresin@gmail.com.asc
>
--
Andres Jimenez
GPG : http://www.andresin.com/gpg/gandresin@gmail.com.asc
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list