[asterisk-users] [URGENT] Zap channels fail to load

[Andres Jimenez]

I forgot to mentio asterisk log this 2 errors:

[Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to get parameters
[Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to register channel '1-15'

Any hint?

Thanks in advance.
Andres

On Tue, Feb 26, 2008 at 10:44 AM, Andres Jimenez <gandresin at gmail.com> wrote:
> I have spent some time this morning trying to add an Astribank to our
>  current Asterisk, but it failed, so I just removed the hardware,
>  restore the config files to the original setup and started asterisk.;
>
>  I could see that no Zap channels are started so I did load chan_zap.so:
>  pbx*CLI> module load chan_zap.so
>  [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application:
>  Already have an application 'ZapSendKeypadFacility'
>   == Parsing '/etc/asterisk/zapata.conf': Found
>  [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to
>  specify channel 1: Device or resource busy
>  [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open
>  channel 1: Device or resource busy
>  here = 0, tmp->channel = 1, channel = 1
>  [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable
>  to register channel '1-15'
>
>  Fair enough. I did unloaded chan_zap.so (because of the first error)
>  and tried again:
>
>  pbx*CLI> module load chan_zap.so
>  [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application:
>  Already have an application 'ZapSendKeypadFacility'
>   == Parsing '/etc/asterisk/zapata.conf': Found
>  [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to
>  specify channel 1: Device or resource busy
>  [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open
>  channel 1: Device or resource busy
>  here = 0, tmp->channel = 1, channel = 1
>  [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable
>  to register channel '1-15'
>
>  It looks like the problem is in the zap card's first channel:
>
>  pbx:~# cat /proc/zaptel/1
>  Span 1: WCT1/0 "Wildcard TE12xP Card 0" HDB3/CCS
>         IRQ misses: 36
>
>            1 WCT1/0/1 Clear (In use)
>            2 WCT1/0/2 Clear
>            3 WCT1/0/3 Clear
>            4 WCT1/0/4 Clear
>            5 WCT1/0/5 Clear
>            6 WCT1/0/6 Clear
>            7 WCT1/0/7 Clear
>            8 WCT1/0/8 Clear
>            9 WCT1/0/9 Clear
>           10 WCT1/0/10 Clear
>           11 WCT1/0/11 Clear
>           12 WCT1/0/12 Clear
>           13 WCT1/0/13 Clear
>           14 WCT1/0/14 Clear
>           15 WCT1/0/15 Clear
>           16 WCT1/0/16 HDLCFCS
>           17 WCT1/0/17 Clear
>           18 WCT1/0/18 Clear
>           19 WCT1/0/19 Clear
>           20 WCT1/0/20 Clear
>           21 WCT1/0/21 Clear
>           22 WCT1/0/22 Clear
>           23 WCT1/0/23 Clear
>           24 WCT1/0/24 Clear
>           25 WCT1/0/25
>           26 WCT1/0/26
>           27 WCT1/0/27
>           28 WCT1/0/28
>           29 WCT1/0/29
>           30 WCT1/0/30
>           31 WCT1/0/31
>
>
>  Is there any change any Astribank related stuff can be causing this?
>
>  I have ensured that no Astribanks modules are loaded and even rebooted
>  the box, but no success.
>
>
>  pbx:~# cat /etc/zaptel.conf
>  # CRC off
>  #
>  loadzone = uk
>  defaultzone = uk
>
>  span=1,1,0,ccs,hdb3
>  bchan=1-15
>  dchan=16
>  bchan=17-24
>
>  #or this with crc on
>  #
>  #loadzone = uk
>  #defaultzone = uk
>
>  #span=1,1,0,ccs,hdb3,crc4
>  #bchan=1-15
>  #dchan=16
>  #bchan=17-24
>
>  pbx:~# cat /etc/asterisk/zapata.conf
>  language=en
>  internationalprefix = 00
>  nationalprefix = 0
>  switchtype = euroisdn
>  pridialplan = local
>  priindication = outofband
>  usecallerid = yes
>  hidecallerid = no
>  callwaiting = yes
>  usecallingpres = yes
>  callwaitingcallerid = yes
>  threewaycalling = yes
>  transfer = yes
>  cancallforward = yes
>  callreturn = yes
>  group = 1
>  callgroup = 0
>  pickupgroup = 0
>  immediate = no
>  echotraining = yes
>  echocancel = yes
>  echocancelwhenbridged = no
>  facilityenable = yes
>  musiconhold = default
>  ;overlapdial = yes
>  overlapdial = no
>  immediate = no
>  txgain = -4.0
>  rxgain = -4.0
>  signalling = pri_cpe
>  channel => 1-15
>  ;channel => 17-32
>  channel => 17-24
>  ;toneduration=100
>  toneduration=300
>  ;relaxdtmf=yes
>
>
>
>  Thanks,
>
>  --
>  Andres Jimenez
>
>  GPG : http://www.andresin.com/gpg/gandresin@gmail.com.asc
>



-- 
Andres Jimenez

GPG : http://www.andresin.com/gpg/gandresin@gmail.com.asc