[asterisk-users] SPA-3000 caller ID and KPN

[Tim Johnson]

Quoting Jaap Winius <jwinius at umrk.to>:

> Hi list,
>
> Hopefully, some of our Dutch members can help with this one. I'm also
> based in the Netherlands and am using a Sipura (Linksys) SPA-3000
> (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test
> system. It works fine, except that the Called ID (CID) is not working.
> I'm aware that KPN (our local telco) requires a separate subscription
> to activate CID on POTS lines and I've confirmed that is working. Yet,
> I've not been able to get the SPA-3000 to pas the CID on to Asterisk,
> and I know of no relevant SPA-3000 settings for doing this other than:
>
>     * Regional
>          Miscellaneous
>             Caller ID Method:  ETSI DTMF with PR
>
>     * PSTN Line
>          PSTN-To-VoIP Gateway Setup
>             PSTN CID For VoIP CID:  yes
>
> As some have suggested, I've also set the Regional / Miscellaneous /
> Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to
> me as it should not make a difference once you've selected a DTMF CID
> method.
>
> I've also experimented with increasing the answer and ring-through
> delays, but this makes no difference. I've been told that this is
> because KPN always sends the CID on ahead of the rest of the call to
> begin with.
>
> Could it be that I'm missing something?
>
> Thanks,
>
> Jaap

Hi Jaap,

I have a SPA3102 which is supposed to be similar. Make sure you leave  
the PSTN --> Subscriber Information --> Display Name  blank. Also, in  
your sip.conf file, do not specify any "callerid=" value. This  
probably isn't your issue, but I thought just in case...

Tim