[asterisk-users] SPA-3000 caller ID and KPN

[Jaap Winius]

Hi list,

Hopefully, some of our Dutch members can help with this one. I'm also  
based in the Netherlands and am using a Sipura (Linksys) SPA-3000  
(firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test  
system. It works fine, except that the Called ID (CID) is not working.  
I'm aware that KPN (our local telco) requires a separate subscription  
to activate CID on POTS lines and I've confirmed that is working. Yet,  
I've not been able to get the SPA-3000 to pas the CID on to Asterisk,  
and I know of no relevant SPA-3000 settings for doing this other than:

    * Regional
         Miscellaneous
            Caller ID Method:  ETSI DTMF with PR

    * PSTN Line
         PSTN-To-VoIP Gateway Setup
            PSTN CID For VoIP CID:  yes

As some have suggested, I've also set the Regional / Miscellaneous /  
Caller ID FSK Standard: to 'bell 202', but this seems like nonsense to  
me as it should not make a difference once you've selected a DTMF CID  
method.

I've also experimented with increasing the answer and ring-through  
delays, but this makes no difference. I've been told that this is  
because KPN always sends the CID on ahead of the rest of the call to  
begin with.

Could it be that I'm missing something?

Thanks,

Jaap