[asterisk-users] X100P Card in OFFHOOK state

[Jay Ray]

This an FXO card, but for some reason it is configured as an FXS card on asterisk....as per asterisk install Guide...

--- On Tue, 8/26/08, Eric "ManxPower" Wieling <eric at fnords.org> wrote:
From: Eric "ManxPower" Wieling <eric at fnords.org>
Subject: Re: [asterisk-users] X100P Card in OFFHOOK state
To: jonty_11 at yahoo.com, "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Date: Tuesday, August 26, 2008, 11:22 PM

It would be clearer if it said "Hookstate (FXS ports only): Offhook"

i.e. the state information is not valid for FXO ports.

Jay Ray wrote:
> Any pointers on this one?
> 
> --- On Tue, 8/26/08, Jay Ray <jonty_11 at yahoo.com> wrote:
> From: Jay Ray <jonty_11 at yahoo.com>
> Subject: [asterisk-users] X100P Card in OFFHOOK state
> To: asterisk-users at lists.digium.com
> Date: Tuesday, August 26, 2008, 12:24 PM
> 
> After I make a call o n the Zaptel Card X100P FXO module....it remains
offhook state as shown here...
> 
> Signalling Type: FXS Kewlstart
> Radio: 0re2uk*CLI>
> Owner: <None>*CLI>
> Real: <None>k*CLI>
> Callwait: <None>I>
> Threeway: <None>I>
> Confno: -12uk*CLI>
> Propagated Conference: -1
> Real in conference: 0
> DSP: noore2uk*CLI>
> Relax DTMF: noCLI>
> Dialing/CallwaitCAS: 0/0
> Default law: ulaw>
> Fax Handled: noLI>
> Pulse phone: noLI>
> Echo Cancellation: 128 taps, currently OFF
> Actual Confinfo: Num/0, Mode/0x0000
> Actual Confmute: No
> Hookstate (FXS only): Offhook
> 
> 
> 
> ------------------
> Sometimes it still takes a new call while in this state and sometimes
rejects it...
> How to correct it such that after I hangup a call it goes back to onhook
>  state...
> 
> reloading wcfxo module using modprobe clears the issue....
> 
> 
> 
> 
> 
>       _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>       
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, 
T-1, PRI, Frame Relay, Linux, and network design.  Based near 
Birmingham, AL.  Now accepting clients worldwide.



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080827/fe574435/attachment.htm