[asterisk-users] Help with Asterisk to Huawei SoftX3000 registry problem

[Nestor A. Diaz]

Philipp Kempgen wrote:
> Did you enable pedantic=yes in sip.conf?
>   
thank you very much for your help, it fix the problem.

Is there any other issue that i have to take in mind for placing calls ? 
is there any option for set up pedantic for selected peers ? i use 
broadvoice too and it requires pedantic=no on the configuration: 
http://www.broadvoice.com/support_install_asterisk.html , how can 
coexist this two peers on just one asterisk ?

[general]
context=from-sip                ; Default context for incoming calls
allowguest=no                   ; Allow or reject guest calls (default 
is yes)
allowoverlap=no                 ; Disable overlap dialing support. 
(Default is yes)
bindport=5060                   ; UDP Port to bind to (SIP standard port 
is 5060)
bindaddr=0.0.0.0                ; IP address to bind to (0.0.0.0 binds 
to all)
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls

pedantic=yes                    ; Enable checking of tags in headers,

language=es                     ; Default language setting for all 
users/peers
dtmfmode = rfc2833              ; Set default dtmfmode for sending DTMF. 
Default: rfc2833

rtptimeout=60                   ; Terminate call if 60 seconds of no RTP 
or RTCP activity
rtpholdtimeout=300              ; Terminate call if 300 seconds of no 
RTP or RTCP activity

limitonpeers = yes              ; Apply call limits on peers only. This 
will improve



#include custom.d/sip_general.conf

[authentication]

#include custom.d/sip.conf



-- 
Nestor A. Diaz
Ingeniero de Sistemas
Tel. +57 1-600-5490 x 211
Cel. +57 316-227-3593
Tel. SIP: sip:211 at tiendalinux.com
Email/MSN: nestor at tiendalinux.com
http://www.tiendalinux.com/
Bogota, Colombia