[asterisk-users] TDM400P not answering or making calls

[Tom Playford]

Hi,

Thanks for spotting that, however that was a copy-and-paste mistake,
'channel = 3' was is in my zapata.conf. I wish it were that simple!

Thanks again,

Tom

On 11/09/2007, Carlos Rojas <crt.rojas at gmail.com> wrote:
> Heloo,
>
> I think that your error is:
>
> zaptel.conf:
>
> -----------------------
> fxsks=1
> loadzone        = uk
> defaultzone     = uk
>
> zapata.conf:
> ----------------
> [channels]
> language=en
>  context=incoming
> signalling=fxs_ks
> busydetect=yes
> busycount=4
> callprogress=no
> relaxdtmf=yes
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=yes
> cancallforward=yes
> usecallerid=no
> cidsignalling=v23
> cidstart=polarity
> callerid=no
> hidecallerid=no
> echotraining=yes
> echocancel=yes
> echocancelwhenbridged=yes
> musiconhold=default
> immediate=no
>
> channel = 3
>
>
> Best Regards
>
>
>
> On 9/11/07, Tom Playford <tom at playford.net> wrote:
> >
> > Hello,
> >
> > I have recently purchased a TDM400P card with one FXO expansion card,
> > and I'm having problems.
> >
> > The card does not pick up incoming calls. Asterisk detects the ringing
> > line and rings various SIP phones as required. When a sip phone
> > answers, the sip user hears nothing and the PSTN user continues to
> > hear ringing.  Here is the asterisk output for an incoming call:
> >
> > -------------------------------------
> >   == Starting post polarity CID detection on channel 3
> >     -- Starting simple switch on 'Zap/3-1'
> >     -- Executing Set("Zap/3-1", "CALLERID(all)=call to 322817") in new
> stack
> >     -- Executing Dial("Zap/3-1", "Local/601 at special |45") in new stack
> >     -- Called 601 at special
> >     -- Executing Dial("Local/601 at special-ebb2,2", "SIP/203|30") in new
> stack
> >     -- Called 201
> >     -- SIP/203-0814c448 is ringing
> >     -- Local/601 at special-ebb2,1 is ringing
> >     -- SIP/201-081445e8 is ringing
> >     -- SIP/201-081445e8 answered Local/601 at special-ebb2,2
> >     -- Local/601 at special-ebb2,1 stopped sounds
> >     -- Local/601 at special-ebb2,1 answered Zap/3-1
> >   == Spawn extension (special, 601, 1) exited non-zero on
> > 'Local/601 at special-ebb2,2'
> >   == Spawn extension (special, 601, 1) exited non-zero on
> > 'Local/601 at special-ebb2,2'
> > Sep 11 19:25:55 WARNING[3073]: chan_zap.c:3934 zt_handle_event:
> > Ring/Off-hook in strange state 6 on channel 3
> >   == Spawn extension (incoming, s, 2) exited non-zero on 'Zap/3-1'
> >     -- Hungup 'Zap/3-1'
> > -------------------------------------
> >
> > I have set opermode to 'UK' (as I'm in the UK), and dmesg confirms the
> setting.
> >
> > Outgoing calls also fail, the SIP user hears nothing, yet asterisk
> > claims that the call has been picked up. Here is the asterisk log,
> > looks perfectly normal:
> >
> > -------------------------
> > -- Executing Dial("SIP/201-08154a38", "Zap/3/0800800800") in new stack
> >     -- Called 3/0800800800
> >     -- Zap/3-1 answered SIP/201-08154a38
> > -------------------------
> >
> > I am running Debian Etch with kernel 2.6.18 and asterisk version 1.2.13.
> >
> > I'm beginning to think it's a fault with the expansion card... anyone
> > else got any ideas? Oh and the BT line is fine, it works (as well as
> > can be expected) with a X100P card I have.
> >
> >
> > Thanks,
> >
> > Tom
> >
> > Attached:
> >
> > dmesg output:
> > ------------------------
> > apata Telephony Interface Registered on major 196
> > Zaptel Version: 1.2.16
> > Zaptel Echo Canceller: MG2
> > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level,
> > low) -> IRQ 12
> > Freshmaker version: 73
> > Freshmaker passed register test
> > Module 0: Not installed
> > Module 1: Not installed
> > Module 2: Installed -- AUTO FXO (UK mode)
> > Module 3: Not installed
> > Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules)
> > Registered tone zone 4 (United Kingdom)
> > -----------------------------
> >
> > zapata.conf:
> > ----------------
> > [channels]
> > language=en
> > context=incoming
> > signalling=fxs_ks
> > busydetect=yes
> > busycount=4
> > callprogress=no
> > relaxdtmf=yes
> > callwaiting=no
> > callwaitingcallerid=no
> > threewaycalling=no
> > transfer=yes
> > cancallforward=yes
> > usecallerid=no
> > cidsignalling=v23
> > cidstart=polarity
> > callerid=no
> > hidecallerid=no
> > echotraining=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > musiconhold=default
> > immediate=no
> > -----------------
> >
> > zaptel.conf:
> >
> > -----------------------
> > fxsks=3
> > loadzone        = uk
> > defaultzone     = uk
> > -----------------------
> >
> > _______________________________________________
> >
> > Sign up now for AstriCon 2007!  September 25-28th.
> http://www.astricon.net/
> >
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
>
> Sign up now for AstriCon 2007!  September 25-28th.  http://www.astricon.net/
>
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>