[asterisk-users] Linksys SPA3012 inbound FXO problems

[Dave Cotton]

On Thu, 2007-05-03 at 17:56 +0200, lenz wrote:
> Hello list,
> hope someone can help me - I'm going crazy using the FXO port a SPA3012.
> I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that  
> is, once it detects a call, it should simply send it over to the local  
> Asterisk server. No intelligent routing, PIN, anything else....
> 
> I configured it like this:
> 
> PSTN-To-VoIP Gateway Setup
> PSTN-To-VoIP Gateway Enable: yes
> PSTN Caller Auth Method: none
> PSTN Ring Thru Line 1: no
> PSTN Caller Default DP: 1
> 
> Then I configured the dialplan #1 as:
> Dial Plan 1: (S0<:@gw1>)

And that's where it started to go wrong.

(S0<:s at asterisk.ip.address:5060>)

will do what you want.


-- 
Dave Cotton <dcotton at linuxautrement.com>