[asterisk-users] chan problem

[linux at shelob.nl]

I experienced the same problem. The only way I could get both
ISDN and analog working was unloading kernel modules for zaptel
and mISDN after boot and then load them in the order:
zaptel first and then mISDN. Still need to find out how to configure
load order in linux.

grz,

Hans Feringa



> On Mon, Jun 18, 2007 at 12:50:23PM +0200, Josu Lazkano wrote:
>> Hello everybody!
>>
>> I have some problems with my Astersk. I have an analogical OpenVox card
>> and
>> A Billion ISDN card (with mISDN).
>>
>> I load the modules with modprobe zaptel and modprobe wctdm.
>>
>> When I run ztcfg -vv I have this:
>>
>> Zaptel Configuration
>> ======================
>>
>>
>> Channel map:
>>
>> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>>
>> 1 channels configured.
>>
>> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>
> This means your /etc/zaptel.conf is incorrect. Start by correcting it.
> Or maybe the driver has not loaded correctly.
>
> Which OpenVox card is it?
>
> What is the output of:
>
>   lspci
>   cat /proc/zaptel/*
>
>> zaptel.conf:
>>
>> loadzone=es
>> defaultzone=es
>> fxsks=1
>
> --
>                Tzafrir Cohen
> icq#16849755                    jabber:tzafrir at jabber.org
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>