[asterisk-users] TDM400 with 1 FXO

[younss azzayani]

you don't have to connect the power connecter to TDM if you are using
FXO, it's used with FXS to generate a signal to phones

2007/2/9, MBIT Technologies <mail at mbit.com.au>:
> Hi David
>
> Also make sure the power connector is also connected to the board.
>
>
> Regards
>
>
> Mark Brooker
> T: 02 4959 8670
> M: 0415 846 865
> F: 02 4950 5609
> E: mark at mbit.com.au
> W: http://www.mbit.com.au
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Klaverstyn,
> David C
> Sent: Friday, 9 February 2007 1:08 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [asterisk-users] TDM400 with 1 FXO
>
> Hi,
>
> Yes it should, I have changed it back and is still causing the same
> problems.
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leo Ann
> Boon
> Sent: Friday, 9 February 2007 12:02 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] TDM400 with 1 FXO
>
>
> Klaverstyn, David C wrote:
> >
> > Hi All,
> >
> >
> >
> > I cannot get my TDM to work correctly.
> >
> >
> >
> > In my /etc/zaptel.conf file I have
> >
> > loadzone = us
> >
> > defaultzone=us
> >
> >
> >
> > fxoks=1
> >
> Shouldn't this be fxsks if you're using an FXO module as analog trunk?
>
> Leo
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>