[asterisk-users] Trying to register an G.729 codec boght from Digium and the "register" command does aboslutely nothing

[Cosmin Prund]

Digium support cleared the issue for me, they sent me a new "register" 
utiliy by mail and this one worked as expected. I registered my codedc 
and tested my codec. If anyone needs to know, I tested the codec using a 
SIPURA 3000 ATA so I can confirm this ATA works with G729.

I'd like to add: Digium support responded very quickly.

Cosmin Prund wrote:
> Hello: I got into a trap. As far as I know I do not need to pay any 
> royalties to use G.729b in Romania, so I should have used other 
> drivers. The installation procedure looked difficult so I decided to 
> get one from Digium - it's not that expensive, my time is much more 
> expensive.
>
> Made the payment, got they key, downloaded and copied everything as in 
> "http://kb.digium.com/entry/30/5/" but when I called "register" I got 
> no result. Actually I do get the prompt asking me to use "-l" to see 
> the licence, nothing after that. It gives no error message, nothing at 
> all!
>
> My first ethernet device is "eth0" so it's not that; I'm able to 
> browse "https" sites so the ports are open. I *disabled* the firewall 
> and tried again, no success, so it's not firewall related. What to do 
> next?
>
> Thanks.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>