[asterisk-users] Trying to register an G.729 codec boght from Digium and the "register" command does aboslutely nothing

[Tim Panton]

On 7 Feb 2007, at 15:54, Cosmin Prund wrote:

> Hello: I got into a trap. As far as I know I do not need to pay any  
> royalties to use G.729b in Romania, so I should have used other  
> drivers. The installation procedure looked difficult so I decided  
> to get one from Digium - it's not that expensive, my time is much  
> more expensive.
>
> Made the payment, got they key, downloaded and copied everything as  
> in "http://kb.digium.com/entry/30/5/" but when I called "register"  
> I got no result. Actually I do get the prompt asking me to use "-l"  
> to see the licence, nothing after that. It gives no error message,  
> nothing at all!
>
> My first ethernet device is "eth0" so it's not that; I'm able to  
> browse "https" sites so the ports are open. I *disabled* the  
> firewall and tried again, no success, so it's not firewall related.  
> What to do next?

It may be firewall related, when I did it (a while back) registration  
tool used some 'non-standard' port I had to open for it.
Still Digium support should help you there...

Tim.
>
> Thanks.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

Tim Panton

www.mexuar.net
www.westhawk.co.uk/