[asterisk-users] New user question (X100P)

[David Ruggles]

Thanks for the help!

>> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> This error message is specifically from running ztcfg.
> What do you have in /proc/zaptel/* ? What in /etc/zaptel.conf ?
> The difference between the two is the immediate cause for the error.

In /proc/zaptel I have a single file named 1
In /etc/zaptel.conf I have the following lines:
fxsks=1-2
loadzone=us
defaultzone=us

> What do you see in the kernel logs e.g: dmesg| tail ) after loading the
> module wcfxo ?

I did the following:
# rmmod wcfxo
# modprobe wcfxo
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wcfxo
# dmesg | tail
Failed to initailize DAA, giving up...
Wcfxo: probe of 0000:01:07.0 failed with error -5
Failed to initailize DAA, giving up...
Wcfxo: probe of 0000:01:08.0 failed with error -5

Using lspci I verified that 01:07.0 and 01:08.0 are the X100P

> What linux distribution do you use, anyway?

Fedora Core 6

Thanks,

David Ruggles
CCNA MCSE (NT) CNA A+
Network Engineer	Safe Data, Inc.
(910) 285-7200	david at safedatausa.com