[asterisk-users] TDM400 noHangup

[Mochamad Susantok]

I am don't sure what PBX we have, but when i hangup i hear like " tut tut
tut " in the other side, Is that not "disconnected signal" ?

FYI when i take call from PBX to VoIP client or vice versa. it's ok. What
do you think, are there is have some relation with my problem ?

> What PBX do you have connected to the Asterisk servers? My experience is
> that most PBXs do not provide a disconnect signal on their analog station
> ports. I have had the most success with disconnects on Avaya PBXs. Nortel
> analog stations last I tested with any, did not provide a disconnect
> signal. On these other PBXs you will need to use "band-aids" like having
> zaptel monitor for busy or dial tone when the analog station hangs up.
>
> Mike
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>