[asterisk-users] Unicall protocol error. Cause 32776

[Roger C. Beraldi Martins]

Moises,

I was reading about your first reply and you said in the 2nd step:

>
>2. libmfcr2 will set the ABCD bits to 0x0 (000) ( normally the ABCD
>bits are in Idle 1001 ). Setting the ABCD bits to 0x0 is our way to
>tell the far end ( the telco ) that we want to start a call, this is
>known as the "Seize".
>

If I understood correctly the libmfcr2 must put bits 0000 (Size) to indicate
it's will dial.
But at this time on log libunicall put 0001 to Seize:

>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating
a new call with CRN 32769
>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001
->      [1/DIALING /Seize         /Idle         ]
>[Dec 14 09:53:42] VERBOSE[28143] logger.c:     -- Called g1

After this libunicall set the IDLE (1001) state again:

[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001
->      [1/IDLE    /Idle          /Idle         ]


Are this correctly ?


Regards,



2007/12/14, Roger C. Beraldi Martins <rogerberaldi at gmail.com>:
>
> Dears,
>
> Here is the logs when I put loglevel=255 on unicall.conf, I have use
> max-wait = 10000
>
>
> [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call called - 'g1'
> [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call caller id -
> '3007'
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Call
> control(1)
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Make
> call
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating
> a new call with CRN 32769
> [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001
> ->      [1/DIALING /Seize         /Idle         ]
> [Dec 14 09:53:42] VERBOSE[28143] logger.c:     -- Called g1
> [Dec 14 09:53:42] NOTICE[28143] chan_unicall.c: Unicall/1 event Dialing
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1
> seize_ack_wait_expired
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 R2 prot.
> err. [1/DIALING /Seize         /Idle         ] cau
> se 32776 - Seize ack timed out
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001
> ->      [1/IDLE    /Idle          /Idle         ]
> [Dec 14 09:53:53] NOTICE[28143] chan_unicall.c: Unicall/1 event Protocol
> failure
> [Dec 14 09:53:53] ERROR[28143] chan_unicall.c: Unicall/1 protocol error.
> Cause 32776
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> echo cancel
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: disabled echo cancellation
> on channel 1
> [Dec 14 09:53:53] WARNING[28143] app_dial.c: Unable to forward voice or
> dtmf
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> gains
> [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel
> switching
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Hangup: channel: 1 index =
> 0, normal = 10, callwait = -1, thirdcall = -1
> [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Updated conferencing on 1,
> with 0 conference users
> [Dec 14 09:53:53] VERBOSE[28143] logger.c:     -- Hungup 'UniCall/1-1'
> [Dec 14 09:53:53] VERBOSE[28143] logger.c:   == Everyone is busy/congested
> at this time (1:0/0/1)
> [Dec 14 09:53:53] DEBUG[28143] app_macro.c: Executed application: Dial
>
>
> Best Regards,
>
>
>
> --
> Atenciosamente,
>
> Roger C. Beraldi Martins
> Fone: 41-8828-7068
>



-- 
Atenciosamente,

Roger C. Beraldi Martins
Fone: 41-8828-7068
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071214/424b66f2/attachment.htm