Moises,<br><br>I was reading about your first reply and you said in the 2nd step:<br><br>><br>>2. libmfcr2 will set the ABCD bits to 0x0 (000) ( normally the ABCD<br>>bits are in Idle 1001 ). Setting the ABCD bits to 0x0 is our way to
<br>>tell the far end ( the telco ) that we want to start a call, this is<br>>known as the "Seize".<br>><br><br>If I understood correctly the libmfcr2 must put bits 0000 (Size) to indicate it's will dial.
<br>But at this time on log libunicall put 0001 to Seize:<br><br>>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating a new call with CRN 32769
<br>>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]<br>>[Dec 14 09:53:42] VERBOSE[28143] logger.c: -- Called g1<br><br>After this libunicall set the IDLE (1001) state again:
<br><br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br><br><br>Are this correctly ?<br><br><br>Regards,<br><br><br><br><div><span class="gmail_quote">
2007/12/14, Roger C. Beraldi Martins <<a href="mailto:rogerberaldi@gmail.com">rogerberaldi@gmail.com</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Dears,<br><br>Here is the logs when I put loglevel=255 on unicall.conf, I have use max-wait = 10000<br><br><br>[Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call called - 'g1'<br>[Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call caller id - '3007'
<br>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Call control(1)<br>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Make call<br>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating a new call with CRN 32769
<br>[Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]<br>[Dec 14 09:53:42] VERBOSE[28143] logger.c: -- Called g1<br>[Dec 14 09:53:42] NOTICE[28143] chan_unicall.c: Unicall/1 event Dialing
<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 seize_ack_wait_expired<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 R2 prot. err. [1/DIALING /Seize /Idle ] cau
<br>se 32776 - Seize ack timed out<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br>[Dec 14 09:53:53] NOTICE[28143] chan_unicall.c: Unicall/1 event Protocol failure
<br>[Dec 14 09:53:53] ERROR[28143] chan_unicall.c: Unicall/1 protocol error. Cause 32776<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel echo cancel<br>[Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: disabled echo cancellation on channel 1
<br>[Dec 14 09:53:53] WARNING[28143] app_dial.c: Unable to forward voice or dtmf<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel gains<br>[Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel switching
<br>[Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Hangup: channel: 1 index = 0, normal = 10, callwait = -1, thirdcall = -1<br>[Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Updated conferencing on 1, with 0 conference users
<br>[Dec 14 09:53:53] VERBOSE[28143] logger.c: -- Hungup 'UniCall/1-1'<br>[Dec 14 09:53:53] VERBOSE[28143] logger.c: == Everyone is busy/congested at this time (1:0/0/1)<br>[Dec 14 09:53:53] DEBUG[28143] app_macro.c: Executed application: Dial
<br><br><br>Best Regards,<br><span class="sg"><br><br clear="all"><br>-- </span><div><span class="e" id="q_116d8849269b47a7_2"><br>Atenciosamente,<br><br>Roger C. Beraldi Martins<br>Fone: 41-8828-7068
</span></div></blockquote></div><br><br clear="all"><br>-- <br>Atenciosamente,<br><br>Roger C. Beraldi Martins<br>Fone: 41-8828-7068