[Asterisk-Users] TDM

[Steve Totaro]

Is your machine seeing the card? /var/log/messages? Are you loading the 
zaptel drivers? modprobe zaptel, modprobe wctdm?

Curt Shaffer wrote:
>
> The TDM01B is 4 port capable but has only 1 FXO module. I’m running 
> asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B 
> working. When I do the zttool it shows 4/1/0. I can dial out from a 
> POTS phone up to the point that the cable plugs into the card.
>
> Here is my /etc/zaptel.conf
>
> loadzone=us
>
> fxsks=1
>
> and here is my /etc/Zapata.conf
>
> [channels]
>
> language=en
>
> #include zapata_additional.conf
>
> context=from-zaptel
>
> signalling=fxs_ks
>
> faxdetect=incoming
>
> usecallerid=asreceived
>
> echocancel=yes
>
> callprogress=no
>
> busydetect=no
>
> echocancelwhenbridged=no
>
> echotraining=800
>
> group=0
>
> channel=>1
>
> When I dial in Asterisk does not even show an initiation of the call. 
> When I dial out on that trunk I get all circuits busy. Ztcfg –vvv 
> shows the following
>
> ztcfg -vvv
>
> Zaptel Configuration
>
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>
> 1 channels configured.
>
> Any help would be appreciated.
>
> Curt
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>