[Asterisk-Users] TDM
Curt Shaffer
cshaffer at gmail.com
Sat May 27 14:06:29 MST 2006
The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk
1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do
the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point
that the cable plugs into the card.
Here is my /etc/zaptel.conf
loadzone=us
fxsks=1
and here is my /etc/Zapata.conf
[channels]
language=en
#include zapata_additional.conf
context=from-zaptel
signalling=fxs_ks
faxdetect=incoming
usecallerid=asreceived
echocancel=yes
callprogress=no
busydetect=no
echocancelwhenbridged=no
echotraining=800
group=0
channel=>1
When I dial in Asterisk does not even show an initiation of the call. When I
dial out on that trunk I get all circuits busy. Ztcfg -vvv shows the
following
ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Any help would be appreciated.
Curt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060527/b3a86b0f/attachment.htm
More information about the asterisk-users
mailing list