[Asterisk-Users] OT: AudioCodesMP124-C/FSX/AC/SIP

[William Piper]

Thank you for your help, however I still cannot get this thing to connect to
asterisk. I followed your instructions to the letter & couldn't get it to
connect.

I'd be happy to throw it up on a public IP if anyone would like to take a
crack at getting it to work.

Thanks,

bp

On 5/24/06, The VoIP Connection <asterisk-biz at thevoipconnection.com> wrote:
> Here are the step by step instructions for setting up a brand new
Audiocodes
> FXS gateway for use with an Asterisk server:
>
> Connect the gateway to a network switch and connect a computer to the same
> switch. Then configure the IP address of the computer to 10.1.10.2. Then
run
> your web browser and point it to http://10.1.10.10 and login using the
> information below.
>
> Default IP address: 10.1.10.10
> Default user name: Admin
> Default password: Admin
>
> Goto "Quick Setup" and change the following:
> IP Address => Set to the new IP address of the AudioCodes gateway
> Subnet Mask => Set to the correct netmask for your local network
> Default Gateway Address => Set to the correct gateway IP address for your
> local network
> Working With Proxy => Set to "Yes"
> Proxy IP Address => Set to the IP address of the Asterisk server
> Enable Registration => Set to "Enable"
>
> Restart the gateway then log back in using the new IP address.
>
> Goto Protocol Management -> Protocol Definition -> Proxy & Registration
> Registrar IP Address => Set to the IP address of the Asterisk server
> Registration Time => Set to "60"
> Subscription Mode => Set to "Per Endpoint"
> Authentication Mode => Set to "Per Endpoint"
>
> Goto Protocol Management -> Protocol Definition -> DTMF & Dialing
> Max Digits In Phone Num => Set to a large enough number such as "32"
>
> Goto Protocol Management -> Protocol Definition -> Coders
> Add coders as needed You need to set at least G.711U-law
>
> Goto Protocol Management -> Endpoint Settings -> Authentication
> Set SIP username and password for each port
>
> Goto Protocol Management -> Endpoint Phone Numbers
> Enter an extension (phone) number for every used channel
>
> Your AudioCodes gateway is now ready.
>
> Michael Crown
> Managing Partner
> www.thevoipconnection.com
> 321.989.6728 ext. 611
> sip:611 at voiceserver.thevoipconnection.com