[Asterisk-Users] GXP2k and BLF problem

[asterisk]

Phones are configured for "asterisk BLF" . Like I said, the config works
when the phone is defaulted and rebuilt but stops working if the server is
rebooted. Show hints Gives:

 

-= Registered Asterisk Dial Plan Hints =-

   310                 : SIP/310               State:Unavailable
Watchers  0

   305                 : SIP/305               State:Idle
Watchers  0

   304                 : SIP/304               State:Idle
Watchers  0

   303                 : SIP/303               State:Idle
Watchers  0

   302                 : SIP/302               State:Idle
Watchers  0

   301                 : SIP/301               State:Unavailable
Watchers  0

----------------

-          6 hints registered

 

Thanks

 

fadge

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:01
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

Are the GXP's configured properly for BLF and what does show hints print?

 

Lee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

It does not happen with a reload of asterisk but when the server is
rebooted. I have set the register timeout to 1 min but this has no effect.
The BLF still does not work. The * is V 1.2.7.1. I can see the phone
register first time when phone reboots and would expect to see it
re-register every 1 min on the console if I understand things correctly, but
it does not.

 

Fadge

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

Stopping and restarting Asterisk will lose the hints, then you will have to
wait until the phone registers again.  With 1.2.7.1 a reload shouldn't lose
anything.  Change the register time on the phones to something less that 60
minutes if it's a big problem.  Instead of factory defaulting the phones you
might find a simple restart will re-register the phone and BLF will work on
the phone.

 

Regards

 

lee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem

asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of
asterisk. In this case, have to wait until phone re-registers and
re-subscribe for BLFs...

2006/5/24, asterisk <asterisk at zinix.co.uk>: 


Hi,

Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as one
touch dials and call the correct number. The only way I cen get the lights 
working again is to reset to factory default and re-build the config.

I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.

Any ideas ?

Fadge

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users


###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/370d0180/attachment.htm