[Asterisk-Users] GXP2k and BLF problem

[Lee Archer]

Are the GXP's configured properly for BLF and what does show hints
print?
 
Lee

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem



It does not happen with a reload of asterisk but when the server is
rebooted. I have set the register timeout to 1 min but this has no
effect. The BLF still does not work. The * is V 1.2.7.1. I can see the
phone register first time when phone reboots and would expect to see it
re-register every 1 min on the console if I understand things correctly,
but it does not.

 

Fadge

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

Stopping and restarting Asterisk will lose the hints, then you will have
to wait until the phone registers again.  With 1.2.7.1 a reload
shouldn't lose anything.  Change the register time on the phones to
something less that 60 minutes if it's a big problem.  Instead of
factory defaulting the phones you might find a simple restart will
re-register the phone and BLF will work on the phone.

 

Regards

 

lee

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem

asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of
asterisk. In this case, have to wait until phone re-registers and
re-subscribe for BLFs...

2006/5/24, asterisk <asterisk at zinix.co.uk>: 


Hi,

Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as
one
touch dials and call the correct number. The only way I cen get the
lights 
working again is to reset to factory default and re-build the config.

I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.

Any ideas ?

Fadge

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users


###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/f490cc1f/attachment.htm