[Asterisk-Users] Unable to get TDM400p working

[Sean Cook]

couple of things... was asterisk compiled after zaptel?  from the cli 
try "load chan_zap.so" and see what you get

Ben Gore wrote:
> This has got to be a stupid error I'm making...
>
> I have been experimenting with different hardware and software
> configurations before I decide what to use as a production platform. Up
> until just recently things were going well.
>
> But now it appears I'm unable to get access to my TDM400p from Asterisk. I
> know the TDM card works fine, used it in another machine where it
> performed flawlessly. I have been using the same set of conf files, just
> copying them over from machine to machine. The hardware is Pentium 4
> all-Intel chipset mainboard.
>
> The one difference here is I'm trying CentOS. I've been through the
> problems getting Zaptel to compile with the error in spinlock.h. I got
> to...
>
> Zaptel Configuration
> ======================
>
>
> Channel map:
>
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
> 4 channels configured.
>
> and thought I was home free. Wrong!
>
> zttool recognizes the card properly and reports status "OK"
>
> Asterisk runs and I can make calls on SIP phones with no problems. However
> I get no dial tone on the analog phone and outgoing calls through the TDM
> (from the SIP phones of course!) produce this on the console:
>
> NOTICE[5934]: app_dial.c:1010 dial_exec_full: Unable to create channel of
> type 'Zap' (cause 66 - Channel not implemented)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing Congestion("SIP/100-24d1", "") in new stack
>   == Spawn extension (internal, 91234567, 102) exited non-zero on
> 'SIP/100-24d1'
>
> The conf files are the same as they were on another working machine, I
> just copied them over. I'll be going over them /again/ next.
>
> What am I missing?
>
> Thanks.
>
> -Ben
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>