[Asterisk-Users] Help with IRQ conflict between wct2xxp and eth0

[Phil Menico]

I have a conflict problem with the eth0 card and wct2xxp digium board.
The PRI can receive calls but my network connection is gone.

When I "cat /proc/interrupts" I get the following:

1 ..

1 ..

..

..

..

169 0 IO-APIC-level wct2xxp, eth0

..

etc.

even before I "modprobe wct2xxp"

After I "modprobe wct2xxp" and "modprobe wctdm" and again run "cat
/proc/interrupts"

I then get:

 

..

..

..

..

..

169 118489 IO-APIC-level wct2xxp, eth0

201 118497 IO-APIC-level wctdm 

..

etc

 

How can I force the wct2xxp to load on a separate IRQ? I tried moving
the eth0 to IRQ 10 but could not.

Any ideas?

 
 

Thank you.

Phil Menico 

XTEND Communications 
171 Madison Avenue, New York, NY 10016 
212-951-7632 (Office) 
212-951-7683 (Fax) 
www.xtend.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060504/044888eb/attachment.htm