[Asterisk-Users] Re: Alarm on Unicall

[acriollo]

Im triyed with span=1,0,0,cas,hdb3 with no results.

Mi msn is acriollo at hotmail.com

Regards and thakns.



2006/3/27, Melcon Moraes <levelz at terra.com.br>:
>
> Well,
>
> Did you try "span=1,1,0,cas" only? I think you can have hdb3 or ami for
> coding but nothing.
>
> Do you have some kind of IM?
>
> []'s
> MM
> -----Original Message-----
> From:   acriollo <crmeae at gmail.com>
> To:     "Asterisk Users Mailing List - Non-Commercial Discussion" <
> asterisk-users at lists.digium.com>
> Cc:
> Sent:  Mon, 27 Mar 2006 18:24:51 -0600
> Delivered:  Mon,  27 Mar 2006 21:19:22
> Subject:[Asterisk-Users] Re: Alarm on Unicall
>
> Sorry , I meann
> i tryed with span=1,1,0,cas ,and the results are the same.
> CRC4, is unavailable.
>
> The Telco says the everyting is Ok on his installation, but the problem
> persiste.
> the zttool never show the yellow alarm, just the asterisk.
>
> We made few months ago a loop test with the telco, and he says that all is
> OK. the circuit never lost the sync.
>
> I have a  E1/T1 Digium card.
>
> Thanks.
>
> 2006/3/27, Melcon Moraes <levelz at terra.com.br>:
> >
> > It looks like sliping frames also. Steve has a divine rod to check if
> > the frames are sliping at the very moment this happens.
> >
> > Putting all the jokes aside, how do you know that hdb3 isn't supported?
> > Maybe you need some sort of CRC4, so try "span=1,1,0,cas,hdb3,crc4"
> >
> > What does your telco says about this E1 on their side?
> >
> > Which card do you have?
> >
> > []'s
> > MM
> >
> >
> > -----Original Message-----
> > From:   acriollo <crmeae at gmail.com>
> > To:     asterisk-users at lists.digium.com
> > Cc:
> > Sent:  Mon, 27 Mar 2006 17:06:49 -0600
> > Delivered:  Mon,  27 Mar 2006 20:03:40
> > Subject:Alarm on Unicall
> >
> > Thanks all for four feedback ,
> > i tryed with span=1,1,0,cas ,hdb3 is not supported, and the results are
> > the
> > same.
> >
> > Some one toldme that this can be a grounding problem.  There is a
> > posibility
> > ?
> > The messages are peteated all the time, then i lost some calls and some
> > times we can not access to the PSTN.
> >
> > Regards.
> >
> >
> > 2006/3/27, acriollo <crmeae at gmail.com>:
> > >
> > > Hi all,
> > > any body can tell me why i am receiving this message in my sever ?
> > >
> > > I have running * with 10 Digital Lines, but i am receiving a lot of
> > times
> > > this message .
> > > Is a software issue or is a hardware issue ?
> > >
> > > Regards.
> > >
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/5 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/5 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/5 Alarm No Alarm raised, Yellow Alarm cleared
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/6 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/6 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/6 Alarm No Alarm raised, Yellow Alarm cleared
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/7 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/7 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/7 Alarm No Alarm raised, Yellow Alarm cleared
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/8 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/8 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/8 Alarm No Alarm raised, Yellow Alarm cleared
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/9 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/9 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/9 Alarm No Alarm raised, Yellow Alarm cleared
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > > Unicall/10 event Alarm
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > > Unicall/10 Alarm masks 0x0000 0x0004
> > > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > > Unicall/10 Alarm No Alarm raised, Yellow Alarm cleared
> > >
> > >
> >
> > E-mail classificado pelo Identificador de Spam Inteligente Terra.
> > Para alterar a categoria classificada, visite
> >
> >
> http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143500923.992635.10447.morondava.terra.com.br,10797,Des15,Des15
> >
> >
> > --Original Message Ends--
> >
> > --
> > Melcon Moraes <melcon.moraes at terra.com.br>
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> E-mail classificado pelo Identificador de Spam Inteligente Terra.
> Para alterar a categoria classificada, visite
>
> http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143505630.99428.24965.baladonia.terra.com.br,14469,Des15,Des15
>
>
> --Original Message Ends--
>
> --
> Melcon Moraes <melcon.moraes at terra.com.br>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060327/2fe8e9b4/attachment.htm