[Asterisk-Users] Re: Alarm on Unicall

[Melcon Moraes]

Well, 

Did you try "span=1,1,0,cas" only? I think you can have hdb3 or ami for
coding but nothing.

Do you have some kind of IM?

[]'s
MM
 -----Original Message-----
From:   acriollo <crmeae at gmail.com>
To:     "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Cc:     
Sent:  Mon, 27 Mar 2006 18:24:51 -0600
Delivered:  Mon,  27 Mar 2006 21:19:22 
Subject:[Asterisk-Users] Re: Alarm on Unicall

Sorry , I meann
i tryed with span=1,1,0,cas ,and the results are the same.
CRC4, is unavailable.

The Telco says the everyting is Ok on his installation, but the problem
persiste.
the zttool never show the yellow alarm, just the asterisk.

We made few months ago a loop test with the telco, and he says that all is
OK. the circuit never lost the sync.

I have a  E1/T1 Digium card.

Thanks.

2006/3/27, Melcon Moraes <levelz at terra.com.br>:
>
> It looks like sliping frames also. Steve has a divine rod to check if
> the frames are sliping at the very moment this happens.
>
> Putting all the jokes aside, how do you know that hdb3 isn't supported?
> Maybe you need some sort of CRC4, so try "span=1,1,0,cas,hdb3,crc4"
>
> What does your telco says about this E1 on their side?
>
> Which card do you have?
>
> []'s
> MM
>
>
> -----Original Message-----
> From:   acriollo <crmeae at gmail.com>
> To:     asterisk-users at lists.digium.com
> Cc:
> Sent:  Mon, 27 Mar 2006 17:06:49 -0600
> Delivered:  Mon,  27 Mar 2006 20:03:40
> Subject:Alarm on Unicall
>
> Thanks all for four feedback ,
> i tryed with span=1,1,0,cas ,hdb3 is not supported, and the results are
> the
> same.
>
> Some one toldme that this can be a grounding problem.  There is a
> posibility
> ?
> The messages are peteated all the time, then i lost some calls and some
> times we can not access to the PSTN.
>
> Regards.
>
>
> 2006/3/27, acriollo <crmeae at gmail.com>:
> >
> > Hi all,
> > any body can tell me why i am receiving this message in my sever ?
> >
> > I have running * with 10 Digital Lines, but i am receiving a lot of
> times
> > this message .
> > Is a software issue or is a hardware issue ?
> >
> > Regards.
> >
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/5 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/5 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/5 Alarm No Alarm raised, Yellow Alarm cleared
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/6 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/6 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/6 Alarm No Alarm raised, Yellow Alarm cleared
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/7 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/7 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/7 Alarm No Alarm raised, Yellow Alarm cleared
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/8 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/8 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/8 Alarm No Alarm raised, Yellow Alarm cleared
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/9 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/9 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/9 Alarm No Alarm raised, Yellow Alarm cleared
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event:
> > Unicall/10 event Alarm
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event:
> > Unicall/10 Alarm masks 0x0000 0x0004
> > Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3096 handle_uc_event:
> > Unicall/10 Alarm No Alarm raised, Yellow Alarm cleared
> >
> >
>
> E-mail classificado pelo Identificador de Spam Inteligente Terra.
> Para alterar a categoria classificada, visite
>
> http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143500923.992635.10447.morondava.terra.com.br,10797,Des15,Des15
>
>
> --Original Message Ends--
>
> --
> Melcon Moraes <melcon.moraes at terra.com.br>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143505630.99428.24965.baladonia.terra.com.br,14469,Des15,Des15


 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>