[Asterisk-Users] help on mfc/r2

[Melcon Moraes]

Why are you using the bit mask 31? I mean, Do you really need ANI after
DNIS and all the other stuff?

So far, thats all about zaptel setup. Just to make sure, did you really
have chan_unicall loaded? What's the output of "UC show channels".

If everything is allright, you should be able to dial like
Dial(Unicall/g1/${EXTEN})

What do you have in your outgoing file?

[]'s
MM



 -----Original Message-----
From:   Krzysztof Drewicz <drewicz at citicom.pl>
To:     Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Cc:     
Sent:  Sat, 25 Mar 2006 22:27:06 +0100
Delivered:  Sat,  25 Mar 2006 15:24:57 
Subject:[Asterisk-Users] help on mfc/r2

Melcon Moraes napisa³(a):

>IF all the things are right, at *CLI> "UC show channels" will show you
>all the channels you have.
>
>If in your unicall.conf you wrote "group = 1" along with "channels =>"
>declaration, that range  will belong to group 1 and you can use them
>like Unicall/g1.
>
>How many spans are you using? Are they T1 or E1?
>

E1, in e400p:

Detected Tormenta 2 Quad E1/PRI - E400P at 0xdfefe000/0xdfefb800 irq 177
Xilinx Chip successfully loaded, configured and started!!
Detected Card number: 0
Tor2: Launching card: 0
Registered Tormenta2 PCI
Registered tone zone 23 (Poland)
SPAN 1: Primary Sync Source
SPAN 1: Primary Sync Source
Registered tone zone 23 (Poland)

all 30 spans configured on the other side.


ztcfg -vv

Zaptel Configuration
======================

SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
Channel 03: CAS / User (Default) (Slaves: 03)
...
Channel 31: CAS / User (Default) (Slaves: 31)

31 channels configured.

# cat unicall.conf
[channels]
immediate=no
loglevel=255
protocolclass=mfcr2
protocolvariant=cz,20,7,31
protocolend=co
group = 1
context= default
channel => 1-15
channel => 17-31

Any hints?


-- 
Krzysztof Drewicz
<drewicz at citicom.pl>
+48 22 34 54 363


E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143321897.396226.5119.casama.terra.com.br,5595,Des15,Des15

 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>