[Asterisk-Users] help on mfc/r2

[Krzysztof Drewicz]

Melcon Moraes napisał(a):

>IF all the things are right, at *CLI> "UC show channels" will show you
>all the channels you have.
>
>If in your unicall.conf you wrote "group = 1" along with "channels =>"
>declaration, that range  will belong to group 1 and you can use them
>like Unicall/g1.
>
>How many spans are you using? Are they T1 or E1?
>

E1, in e400p:

Detected Tormenta 2 Quad E1/PRI - E400P at 0xdfefe000/0xdfefb800 irq 177
Xilinx Chip successfully loaded, configured and started!!
Detected Card number: 0
Tor2: Launching card: 0
Registered Tormenta2 PCI
Registered tone zone 23 (Poland)
SPAN 1: Primary Sync Source
SPAN 1: Primary Sync Source
Registered tone zone 23 (Poland)

all 30 spans configured on the other side.


ztcfg -vv

Zaptel Configuration
======================

SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
Channel 03: CAS / User (Default) (Slaves: 03)
...
Channel 31: CAS / User (Default) (Slaves: 31)

31 channels configured.

# cat unicall.conf
[channels]
immediate=no
loglevel=255
protocolclass=mfcr2
protocolvariant=cz,20,7,31
protocolend=co
group = 1
context= default
channel => 1-15
channel => 17-31

Any hints?


-- 
Krzysztof Drewicz
<drewicz at citicom.pl>
+48 22 34 54 363

-------------- next part --------------
A non-text attachment was scrubbed...
Name: drewicz.vcf
Type: text/x-vcard
Size: 296 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060325/b83647ad/drewicz.vcf