[Asterisk-Users] Polycom IP600 - no ring?

[Rich Adamson]

Thanks, working great now!


Peter Johnson wrote:
> Have a look in the Polycom phone directory - see if the number of the first
> 7960 is defined in there with a ring type of 0 (silent).
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rich Adamson
> Sent: Sunday, 19 March 2006 1:51 PM
> To: Asterisk Users-List
> Subject: [Asterisk-Users] Polycom IP600 - no ring?
> 
> Have a strange problem...
> 
> When a C7960 calls the Polycom ip600, the ip600's first line button 
> blinks, the ip600 display shows the proper callerid, but the phone does 
> not ring at all.
> 
> If I call the same ip600 from a bt102, the ip600 rings properly.
> 
> If I call the same ip600 from another C7960, the ip600 rings properly.
> 
> All phones and asterisk are on the same lan within a few feet.
> 
> The ip600 is running v1.5.2.0054 and works very well in all other respects.
> 
> Any thoughts on how to diagnose this? (Its definitely not an asterisk 
> config problem.)
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users