[Asterisk-Users] Polycom IP600 - no ring?

[Peter Johnson]

Have a look in the Polycom phone directory - see if the number of the first
7960 is defined in there with a ring type of 0 (silent).

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rich Adamson
Sent: Sunday, 19 March 2006 1:51 PM
To: Asterisk Users-List
Subject: [Asterisk-Users] Polycom IP600 - no ring?

Have a strange problem...

When a C7960 calls the Polycom ip600, the ip600's first line button 
blinks, the ip600 display shows the proper callerid, but the phone does 
not ring at all.

If I call the same ip600 from a bt102, the ip600 rings properly.

If I call the same ip600 from another C7960, the ip600 rings properly.

All phones and asterisk are on the same lan within a few feet.

The ip600 is running v1.5.2.0054 and works very well in all other respects.

Any thoughts on how to diagnose this? (Its definitely not an asterisk 
config problem.)


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users