[Asterisk-Users] ZT_CHANCONFIG failed on channel 2: , Guidance requested

[yusuf]

John Joseph wrote:
> Hi 
>     On fresh install ( both OS and Zaptel )  after
> modifying  /etc/zaptel.conf 
>      as 
>            fxsks=2
>            loadzone=us
>             defaultzone=us 
> 
>    when I do “ztcfg -vv “ , I get the following  
> error
>                   
> Channel map:
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 1 channels configured.
> ZT_CHANCONFIG failed on channel 2: No such device or
> address (6)
> 
> [ even with fxsks=1 ] I get error similar 
> 
> Even when we give “modprobe wctdm” for the first time
> , it gives some error message , but giving the command
> again , it wont show any  error 
>                 
>                          I am confused and lost , I do
> not know how to solve this problem 
>  
>      I am using RHEL4 , Digium developer card 
>                                  Help requested 
>                                      Thanks 
>                                             Joseph
> John 
> 
Hi ,

this could a simple thing where you are mixing up signalling types for 
FXO and FXS.

for example if i have 2 FXO (red)and 2 FXS (green)

the FXO is setup with FXS signailling and FXS with FXO signalling

so if my channels 1 and 2 is green and,
  3 and 4 is red

rmmod wctdm
rmmod zaptel

[zaptel.conf]
fxoks=1-2
fxsks=3-4


[zapata.conf]

signalling=fxo_ks
channel =>1-2
signalling=fxs_ks
channel =>3-4


modprobe zaptel
modprobe wctdm


hope this helps
yusuf