[Asterisk-Users] Unable to open master device '/dev/zap/ctl'

[Kerry Garrison]

Answer is posted here:
http://voipspeak.net/forum/index.php?topic=66.0
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Manuel Casal
> Sent: Monday, January 16, 2006 5:00 AM
> To: asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Unable to open master device '/dev/zap/ctl'
> 
> Hi,
> 
> I'm running A at H with a TDM2400
> 
> When i try to load the wctd24xx always get the same error:
> 
> Notice: Configuration file is /etc/zaptel.conf line 0: Unable 
> to open master device '/dev/zap/ctl'
> 
> 1 error(s) detected
> 
> I try to load the modules manualy:
> 
> [root at asterisk1 ~]# modprobe zaptel
> [root at asterisk1 ~]# modprobe wctdm24xxp
> Notice: Configuration file is /etc/zaptel.conf line 0: Unable 
> to open master device '/dev/zap/ctl'
> 
> 1 error(s) detected
> 
> /var/log/messages:
> 
> Jan 16 07:53:30 asterisk1 kernel: Zapata Telephony Interface 
> Registered on major 196 Jan 16 07:55:12 asterisk1 kernel: 
> ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> 
> IRQ 217 Jan 16 07:55:12 asterisk1 kernel: PCI Config reg is 
> 02900117 Jan 16 07:55:12 asterisk1 kernel: WCTDM2400P: New 
> Reg: fe590000!
> Jan 16 07:55:12 asterisk1 kernel: Detected REG0: 00000100 Jan 
> 16 07:55:12 asterisk1 kernel: Detected REG1: 00007849 Jan 16 
> 07:55:12 asterisk1 kernel: Detected REG2: 0000001d Jan 16 
> 07:55:12 asterisk1 kernel: (pre) Reg fc is 50000027 Jan 16 
> 07:55:12 asterisk1 kernel: (post) Reg fc is 50000024 Jan 16 
> 07:55:12 asterisk1 kernel: Detected REG2: 0000ffff Jan 16 
> 07:55:12 asterisk1 kernel: wctdm2400p: reg is a04c0004 Jan 16 
> 07:55:12 asterisk1 kernel: Resetting the modules...
> Jan 16 07:55:12 asterisk1 kernel: During Resetting the modules...
> Jan 16 07:55:12 asterisk1 kernel: After resetting the modules...
> Jan 16 07:55:13 asterisk1 kernel: Port 1: Not installed Jan 
> 16 07:55:13 asterisk1 kernel: Port 2: Not installed Jan 16 
> 07:55:13 asterisk1 kernel: Port 3: Not installed Jan 16 
> 07:55:13 asterisk1 kernel: Port 4: Not installed Jan 16 
> 07:55:13 asterisk1 kernel: Port 5: Not installed Jan 16 
> 07:55:14 asterisk1 kernel: Port 6: Not installed Jan 16 
> 07:55:14 asterisk1 kernel: Port 7: Not installed Jan 16 
> 07:55:14 asterisk1 kernel: Port 8: Not installed Jan 16 
> 07:55:14 asterisk1 kernel: Port 9: Not installed Jan 16 
> 07:55:14 asterisk1 kernel: Port 10: Not installed Jan 16 
> 07:55:15 asterisk1 kernel: Port 11: Not installed Jan 16 
> 07:55:15 asterisk1 kernel: Port 12: Not installed Jan 16 
> 07:55:15 asterisk1 kernel: Port 13: Installed -- AUTO FXO 
> (FCC mode) Jan 16 07:55:16 asterisk1 kernel: Port 14: 
> Installed -- AUTO FXO (FCC mode) Jan 16 07:55:16 asterisk1 
> kernel: Port 15: Installed -- AUTO FXO (FCC mode) Jan 16 
> 07:55:17 asterisk1 kernel: Port 16: Installed -- AUTO FXO 
> (FCC mode) Jan 16 07:55:17 asterisk1 kernel: Port 17: 
> Installed -- AUTO FXO (FCC mode) Jan 16 07:55:18 asterisk1 
> kernel: Port 18: Installed -- AUTO FXO (FCC mode) Jan 16 
> 07:55:18 asterisk1 kernel: Port 19: Installed -- AUTO FXO 
> (FCC mode) Jan 16 07:55:19 asterisk1 kernel: Port 20: 
> Installed -- AUTO FXO (FCC mode) Jan 16 07:55:19 asterisk1 
> kernel: Port 21: Installed -- AUTO FXO (FCC mode) Jan 16 
> 07:55:19 asterisk1 kernel: Port 22: Installed -- AUTO FXO 
> (FCC mode) Jan 16 07:55:20 asterisk1 kernel: Port 23: 
> Installed -- AUTO FXO (FCC mode) Jan 16 07:55:20 asterisk1 
> kernel: Port 24: Installed -- AUTO FXO (FCC mode) Jan 16 
> 07:55:20 asterisk1 kernel: VPM: Chip 0: ver 33 Jan 16 
> 07:55:20 asterisk1 kernel: VPM: U-law mode Jan 16 07:55:20 
> asterisk1 kernel: VPM: Chip 1: ver 33 Jan 16 07:55:20 
> asterisk1 kernel: VPM: Chip 2: ver 33 Jan 16 07:55:20 
> asterisk1 kernel: VPM: Chip 3: ver 33 Jan 16 07:55:21 
> asterisk1 kernel: VPM: DTMF threshold set to 1250 Jan 16 
> 07:55:21 asterisk1 kernel: VPM: Present and operational Jan 
> 16 07:55:21 asterisk1 kernel: Found a Wildcard TDM: Wildcard 
> TDM2400P Prototype (24 modules)
> 
> Seems that fails the ztcfg command in the modules installations.
> But i dont know how to solve it
> Any Ideas??
> 
> here is my zapata.conf
> 
> [root at asterisk1 ~]# cat /etc/zaptel.conf
> fxsks=13-24
> loadzone        = us
> defaultzone     = us
> 
> Thanks in advance.
> 
> 
> --
> Manuel Casal
> mach at e-sistemas.net
> 
> Sistem at s.NET
> Sistemas de Información y Protección de Datos, S.L.
> Telf. + 34 902 678006
> e-mail: info at e-sistemas.net
> web: http://www.e-sistemas.net
> 
>