[Asterisk-Users] Unable to open master device '/dev/zap/ctl'

[Manuel Casal]

Hi,

I'm running A at H with a TDM2400

When i try to load the wctd24xx always get the same error:

Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

I try to load the modules manualy:

[root at asterisk1 ~]# modprobe zaptel
[root at asterisk1 ~]# modprobe wctdm24xxp
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

/var/log/messages:

Jan 16 07:53:30 asterisk1 kernel: Zapata Telephony Interface Registered 
on major 196
Jan 16 07:55:12 asterisk1 kernel: ACPI: PCI interrupt 0000:02:0c.0[A] -> 
GSI 20 (level, low) -> IRQ 217
Jan 16 07:55:12 asterisk1 kernel: PCI Config reg is 02900117
Jan 16 07:55:12 asterisk1 kernel: WCTDM2400P: New Reg: fe590000!
Jan 16 07:55:12 asterisk1 kernel: Detected REG0: 00000100
Jan 16 07:55:12 asterisk1 kernel: Detected REG1: 00007849
Jan 16 07:55:12 asterisk1 kernel: Detected REG2: 0000001d
Jan 16 07:55:12 asterisk1 kernel: (pre) Reg fc is 50000027
Jan 16 07:55:12 asterisk1 kernel: (post) Reg fc is 50000024
Jan 16 07:55:12 asterisk1 kernel: Detected REG2: 0000ffff
Jan 16 07:55:12 asterisk1 kernel: wctdm2400p: reg is a04c0004
Jan 16 07:55:12 asterisk1 kernel: Resetting the modules...
Jan 16 07:55:12 asterisk1 kernel: During Resetting the modules...
Jan 16 07:55:12 asterisk1 kernel: After resetting the modules...
Jan 16 07:55:13 asterisk1 kernel: Port 1: Not installed
Jan 16 07:55:13 asterisk1 kernel: Port 2: Not installed
Jan 16 07:55:13 asterisk1 kernel: Port 3: Not installed
Jan 16 07:55:13 asterisk1 kernel: Port 4: Not installed
Jan 16 07:55:13 asterisk1 kernel: Port 5: Not installed
Jan 16 07:55:14 asterisk1 kernel: Port 6: Not installed
Jan 16 07:55:14 asterisk1 kernel: Port 7: Not installed
Jan 16 07:55:14 asterisk1 kernel: Port 8: Not installed
Jan 16 07:55:14 asterisk1 kernel: Port 9: Not installed
Jan 16 07:55:14 asterisk1 kernel: Port 10: Not installed
Jan 16 07:55:15 asterisk1 kernel: Port 11: Not installed
Jan 16 07:55:15 asterisk1 kernel: Port 12: Not installed
Jan 16 07:55:15 asterisk1 kernel: Port 13: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:16 asterisk1 kernel: Port 14: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:16 asterisk1 kernel: Port 15: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:17 asterisk1 kernel: Port 16: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:17 asterisk1 kernel: Port 17: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:18 asterisk1 kernel: Port 18: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:18 asterisk1 kernel: Port 19: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:19 asterisk1 kernel: Port 20: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:19 asterisk1 kernel: Port 21: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:19 asterisk1 kernel: Port 22: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:20 asterisk1 kernel: Port 23: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:20 asterisk1 kernel: Port 24: Installed -- AUTO FXO (FCC mode)
Jan 16 07:55:20 asterisk1 kernel: VPM: Chip 0: ver 33
Jan 16 07:55:20 asterisk1 kernel: VPM: U-law mode
Jan 16 07:55:20 asterisk1 kernel: VPM: Chip 1: ver 33
Jan 16 07:55:20 asterisk1 kernel: VPM: Chip 2: ver 33
Jan 16 07:55:20 asterisk1 kernel: VPM: Chip 3: ver 33
Jan 16 07:55:21 asterisk1 kernel: VPM: DTMF threshold set to 1250
Jan 16 07:55:21 asterisk1 kernel: VPM: Present and operational
Jan 16 07:55:21 asterisk1 kernel: Found a Wildcard TDM: Wildcard 
TDM2400P Prototype (24 modules)

Seems that fails the ztcfg command in the modules installations.
But i dont know how to solve it
Any Ideas??

here is my zapata.conf

[root at asterisk1 ~]# cat /etc/zaptel.conf
fxsks=13-24
loadzone        = us
defaultzone     = us

Thanks in advance.


-- 
Manuel Casal
mach at e-sistemas.net

Sistem at s.NET
Sistemas de Información y Protección de Datos, S.L.
Telf. + 34 902 678006
e-mail: info at e-sistemas.net
web: http://www.e-sistemas.net

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3494 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060116/f8958f6a/smime.bin