[Asterisk-Users] Asterisk start errors with TDM2413E

[duane.pudenz at shastaindustries.com]

Issue resolved, Thanks Digium!

The module slot closest to the bracket that contains the connector is the 
last slot.  I assumed that the first slot would be at the bracket.

Silly user error, never assume.

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

o.  602.532.3706
c.  602.692.0304

__________________

I do not think so by reading the documentation however I have changed the 
settings and still get the same error when starting Asterisk

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries




----- Message from <f6hqz-m at hamwlan.net> on Mon, 20 Feb 2006 07:08:05 
+0100 -----
To:
"'Asterisk Users Mailing List - Non-Commercial Discussion'" 
<asterisk-users at lists.digium.com>
Subject:
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
Hi,
 
I believe that you have inverted fxo_ks and fxs_ks into your zapata.cong 
file "signaling=" declaration...
Invert and redo the tests.
 
Good Luck !
Francois BERGERET,
France.
-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com 
[mailto:asterisk-users-bounces at lists.digium.com] De la part de 
duane.pudenz at shastaindustries.com
Envoyé : lundi 20 février 2006 04:34
À : asterisk-users at lists.digium.com
Objet : [Asterisk-Users] Asterisk start errors with TDM2413E


I get the following errors when starting Asterisk. 

       == Parsing '/etc/asterisk/zapata.conf': Found 
     Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to 
specify channel 1: No such device 
     Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open 
channel 1: No such device 
     here = 0, tmp->channel = 1, channel = 1 
     Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to 
register channel '1' 
     Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource: 
chan_zap.so: load_module failed, returning -1 
     Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules: Loading 
module chan_zap.so failed! 
     [root at astrk1-phx ~]# Ouch ... error while writing audio data: : 
Broken pipe 


Software versions 
     asterisk-1.2.3 
     asterisk-addons-1.2.1 
     asterisk-perl-0.08 
     asterisk-sounds-1.2.1 
     libpri-1.2.2 
     zaptel-1.2.4 


Output from modprobes 
     [root at astrk1-phx asterisk]# modprobe -v zaptel 
     insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko 

     [root at astrk1-phx asterisk]# modprobe -v wctdm24xxp 
     install /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg 
     insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko 

     ****  This takes at least 10 seconds to come back to a prompt  **** 


ztcfg output 
     [root at astrk1-phx asterisk]# ztcfg -vv 

     Zaptel Configuration 
     ====================== 

     Channel map: 

     Channel 01: FXO Kewlstart (Default) (Slaves: 01) 
     Channel 02: FXO Kewlstart (Default) (Slaves: 02) 
     Channel 03: FXO Kewlstart (Default) (Slaves: 03) 
     Channel 04: FXO Kewlstart (Default) (Slaves: 04) 
     Channel 05: FXS Kewlstart (Default) (Slaves: 05) 
     Channel 06: FXS Kewlstart (Default) (Slaves: 06) 
     Channel 07: FXS Kewlstart (Default) (Slaves: 07) 
     Channel 08: FXS Kewlstart (Default) (Slaves: 08) 
     Channel 09: FXS Kewlstart (Default) (Slaves: 09) 
     Channel 10: FXS Kewlstart (Default) (Slaves: 10) 
     Channel 11: FXS Kewlstart (Default) (Slaves: 11) 
     Channel 12: FXS Kewlstart (Default) (Slaves: 12) 
     Channel 13: FXS Kewlstart (Default) (Slaves: 13) 
     Channel 14: FXS Kewlstart (Default) (Slaves: 14) 
     Channel 15: FXS Kewlstart (Default) (Slaves: 15) 
     Channel 16: FXS Kewlstart (Default) (Slaves: 16) 

     16 channels configured. 


zaptel.conf 
     fxoks=1-4 
     fxsks=5-16 
     defaultzone=us 
     loadzone=us 


zapata.conf 
     [channels] 

     signalling=fxo_ks 
     echocancel=yes 
     echocancelwhenbridged=yes 
     usecallerid=yes 
     context=outstation 
     channel=> 1-4 


     signalling=fxs_ks 
     echocancel=yes 
     echocancelwhenbridged=yes 
     usecallerid=yes 
     group=2 
     context=incomingpstn 
     channel=> 5-16 


Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060220/924c80b6/attachment.htm