<br><font size=2 face="sans-serif">Issue resolved, Thanks Digium!</font>
<br>
<br><font size=2 face="sans-serif">The module slot closest to the bracket
that contains the connector is the last slot. I assumed that the
first slot would be at the bracket.</font>
<br>
<br><font size=2 face="sans-serif">Silly user error, never assume.</font>
<br><font size=2 face="sans-serif"><br>
Best regards,<br>
<br>
Duane Pudenz<br>
Network Infrastructure Manager<br>
Shasta Industries<br>
<br>
o. 602.532.3706<br>
c. 602.692.0304</font>
<br>
<br><font size=2 face="sans-serif">__________________</font>
<br>
<br><font size=2 face="sans-serif">I do not think so by reading the documentation
however I have changed the settings and still get the same error when starting
Asterisk</font>
<br><font size=2 face="sans-serif"><br>
Best regards,<br>
<br>
Duane Pudenz<br>
Network Infrastructure Manager<br>
Shasta Industries<br>
</font>
<br>
<br>
<br><font size=2 face="sans-serif"><br>
----- Message from <f6hqz-m@hamwlan.net> on Mon, 20 Feb 2006 07:08:05
+0100 -----</font>
<table width=100%>
<tr>
<td width=8%>
<div align=right><font size=3>To:</font></div>
<td width=91%><font size=3>"'Asterisk Users Mailing List - Non-Commercial
Discussion'" <asterisk-users@lists.digium.com></font>
<tr>
<td>
<div align=right><font size=3>Subject:</font></div>
<td><font size=3>RE : [Asterisk-Users] Asterisk start errors with TDM2413E</font></table>
<br><font size=2 face="Arial">Hi,</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">I believe that you have inverted fxo_ks and
fxs_ks into your zapata.cong file "signaling=" declaration...</font>
<br><font size=2 face="Arial">Invert and redo the tests.</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">Good Luck !</font>
<br><font size=2 face="Arial">Francois BERGERET,</font>
<br><font size=2 face="Arial">France.</font>
<br><font size=2 face="Tahoma">-----Message d'origine-----<br>
De : asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]
De la part de duane.pudenz@shastaindustries.com<br>
Envoyé : lundi 20 février 2006 04:34<br>
À : asterisk-users@lists.digium.com<br>
Objet : [Asterisk-Users] Asterisk start errors with TDM2413E<br>
</font>
<br><font size=2 face="sans-serif"><br>
I get the following errors when starting Asterisk.</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
== Parsing '/etc/asterisk/zapata.conf': Found</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open:
Unable to specify channel 1: No such device</font><font size=3> </font><font size=2 face="sans-serif"><br>
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable
to open channel 1: No such device</font><font size=3> </font><font size=2 face="sans-serif"><br>
here = 0, tmp->channel = 1, channel = 1</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap:
Unable to register channel '1'</font><font size=3> </font><font size=2 face="sans-serif"><br>
Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1</font><font size=3> </font><font size=2 face="sans-serif"><br>
Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules:
Loading module chan_zap.so failed!</font><font size=3> </font><font size=2 face="sans-serif"><br>
[root@astrk1-phx ~]# Ouch ... error while writing audio
data: : Broken pipe</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
Software versions</font><font size=3> </font><font size=2 face="sans-serif"><br>
asterisk-1.2.3</font><font size=3> </font><font size=2 face="sans-serif"><br>
asterisk-addons-1.2.1</font><font size=3> </font><font size=2 face="sans-serif"><br>
asterisk-perl-0.08</font><font size=3> </font><font size=2 face="sans-serif"><br>
asterisk-sounds-1.2.1</font><font size=3> </font><font size=2 face="sans-serif"><br>
libpri-1.2.2</font><font size=3> </font><font size=2 face="sans-serif"><br>
zaptel-1.2.4</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
Output from modprobes</font><font size=3> </font><font size=2 face="sans-serif"><br>
[root@astrk1-phx asterisk]# modprobe -v zaptel</font><font size=3>
</font><font size=2 face="sans-serif"><br>
insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
[root@astrk1-phx asterisk]# modprobe -v wctdm24xxp</font><font size=3>
</font><font size=2 face="sans-serif"><br>
install /sbin/modprobe --ignore-install wctdm24xxp &&
/sbin/ztcfg</font><font size=3> </font><font size=2 face="sans-serif"><br>
insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
**** This takes at least 10 seconds to come back to
a prompt ****</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
ztcfg output</font><font size=3> </font><font size=2 face="sans-serif"><br>
[root@astrk1-phx asterisk]# ztcfg -vv</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
Zaptel Configuration</font><font size=3> </font><font size=2 face="sans-serif"><br>
======================</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Channel map:</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Channel 01: FXO Kewlstart (Default) (Slaves: 01)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 02: FXO Kewlstart (Default) (Slaves: 02)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 03: FXO Kewlstart (Default) (Slaves: 03)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 04: FXO Kewlstart (Default) (Slaves: 04)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 05: FXS Kewlstart (Default) (Slaves: 05)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 06: FXS Kewlstart (Default) (Slaves: 06)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 07: FXS Kewlstart (Default) (Slaves: 07)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 08: FXS Kewlstart (Default) (Slaves: 08)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 09: FXS Kewlstart (Default) (Slaves: 09)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 10: FXS Kewlstart (Default) (Slaves: 10)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 11: FXS Kewlstart (Default) (Slaves: 11)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 12: FXS Kewlstart (Default) (Slaves: 12)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 13: FXS Kewlstart (Default) (Slaves: 13)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 14: FXS Kewlstart (Default) (Slaves: 14)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 15: FXS Kewlstart (Default) (Slaves: 15)</font><font size=3>
</font><font size=2 face="sans-serif"><br>
Channel 16: FXS Kewlstart (Default) (Slaves: 16)</font><font size=3>
<br>
</font><font size=2 face="sans-serif"><br>
16 channels configured.</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
zaptel.conf</font><font size=3> </font><font size=2 face="sans-serif"><br>
fxoks=1-4</font><font size=3> </font><font size=2 face="sans-serif"><br>
fxsks=5-16</font><font size=3> </font><font size=2 face="sans-serif"><br>
defaultzone=us</font><font size=3> </font><font size=2 face="sans-serif"><br>
loadzone=us</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
zapata.conf</font><font size=3> </font><font size=2 face="sans-serif"><br>
[channels]</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
signalling=fxo_ks</font><font size=3> </font><font size=2 face="sans-serif"><br>
echocancel=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
echocancelwhenbridged=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
usecallerid=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
context=outstation</font><font size=3> </font><font size=2 face="sans-serif"><br>
channel=> 1-4</font><font size=3> <br>
<br>
</font><font size=2 face="sans-serif"><br>
signalling=fxs_ks</font><font size=3> </font><font size=2 face="sans-serif"><br>
echocancel=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
echocancelwhenbridged=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
usecallerid=yes</font><font size=3> </font><font size=2 face="sans-serif"><br>
group=2</font><font size=3> </font><font size=2 face="sans-serif"><br>
context=incomingpstn</font><font size=3> </font><font size=2 face="sans-serif"><br>
channel=> 5-16</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
<br>
Best regards,<br>
<br>
Duane Pudenz<br>
Network Infrastructure Manager<br>
Shasta Industries<br>
</font>
<br>