[asterisk-users] Is logic right?

[Mayo Jordanov]

Shouldn't the second line (the one with HANGUP) have priority 2  
rather than 1? So it would read:
exten => s/9185415897,2,Hangup
?

regards,
mayo


On Dec 19, 06, at 14:54 , Michael Sullivan wrote:

> OK.  My basic asterisk install seems to be working.  I can get caller
> ID.  My dialplan says:
>
> [incoming]
> ; incoming calls from the FXO port are directed to this context from
> zapata.conf
> exten => s/9185415897,1,Set(CALLERID(name)=Michael Sullivan)
> exten => s/9185415897,1,HANGUP(1)
> exten => s,1,Set(CALLERID(name)=Someone Else)
>
> This is for testing.  It's supposed to check the caller ID to see  
> who is
> calling, and if it's my cell phone, hang up, but let any other number
> through to ring on our handsets.  Instead it rewrites the caller ID  
> name
> to Michael Sullivan and allows the call to pass through.  Here is the
> output of the call to the CLI:
>
>     -- Starting simple switch on 'Zap/1-1'
>     -- Executing Set("Zap/1-1", "CALLERID(name)=Michael Sullivan") in
> new stack
>   == Auto fallthrough, channel 'Zap/1-1' status is 'UNKNOWN'
>     -- Hungup 'Zap/1-1'
>     -- Starting simple switch on 'Zap/1-1'
> Dec 19 16:51:37 NOTICE[7413]: chan_zap.c:6073 ss_thread: Got event 18
> (Ring Begin)...
>     -- Executing Set("Zap/1-1", "CALLERID(name)=Someone Else") in new
> stack
>   == Auto fallthrough, channel 'Zap/1-1' status is 'UNKNOWN'
>     -- Hungup 'Zap/1-1'
>
> In fact, the "hang up on my number" clause isn't even shown in the
> dialplan in the CLI:
>
> camille*CLI> show dialplan incoming
> [ Context 'incoming' created by 'pbx_config' ]
>   's' =>            1. Set(CALLERID(name)=Michael Sullivan)
> [pbx_config]
>   's' =>            1. Set(CALLERID(name)=Someone Else)
> [pbx_config]
> camille*CLI>
> -= 2 extensions (2 priorities) in 1 context. =-
> camille*CLI>
>
>
> What am I doing wrong?
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users