SPAM-LOW: Re: [asterisk-users] .Call files do not seem to work

[Tzafrir Cohen]

On Tue, Dec 19, 2006 at 12:44:39PM -0500, Lee wrote:
> >In the CLI:
> >
> >sip show peer axVoice
> >show dialplan main_menu
> >set verbose 3
> >
> >
> >Then drop the call file
> >
> >What is the CLI trace of the above?
> >
> 
> Hi, thanks for responding.  Please see the output below.
> 
> Please note that moving a call file into /var/spool/asterisk/outgoing 
> did not produce any CLI output.  The file was copied correctly, I 
> believe and not present in the /outgoing directory when I checked with a 
> simple ls command.
> 
> # cp lee.call test.call
> # mv test.call /var/spool/asterisk/outgoing

Are both the current directory and /var/spool/asterisk/outgoing on the
same filesystem? If not, a 'mv' is implemented through a copy.

Anyway, you left out the CLI output of dropping trhe file.

Can Asterisk read that file? Write to it?

> 
> 
> 
> === sip show peer axVoice ===
> =============================
> CLI>
> 
>   * Name       : axVoice
>   Secret       : <Set>
>   MD5Secret    : <Not set>
>   Context      : incoming
>   Subscr.Cont. : <Not set>
>   Language     :
>   AMA flags    : Unknown
>   CallingPres  : Presentation Allowed, Not Screened
>   FromUser     : datatrak
>   FromDomain   : 216.143.130.36
>   Callgroup    :
>   Pickupgroup  :
>   Mailbox      :
>   VM Extension : 555
>   LastMsgsSent : -1
>   Call limit   : 0
>   Dynamic      : No
>   Callerid     : "" <>
>   Expire       : -1
>   Insecure     : port,invite
>   Nat          : Always
>   ACL          : No
>   CanReinvite  : Yes
>   PromiscRedir : No
>   User=Phone   : No
>   Trust RPID   : No
>   Send RPID    : No
>   DTMFmode     : rfc2833
>   LastMsg      : 0
>   ToHost       : 216.143.130.36
>   Addr->IP     : 216.143.130.36 Port 5060
>   Defaddr->IP  : 216.143.130.36 Port 0
>   Def. Username: <set>
>   SIP Options  : (none)
>   Codecs       : 0x4 (ulaw)
>   Codec Order  : (ulaw)
>   Status       : Unmonitored
>   Useragent    :
>   Reg. Contact :
> 
> === show dialplan main_after_hours ===
> (I mistyped the name of the context in original post)
> 
> CLI> show dialplan main_after_hours
> [ Context 'main_after_hours' created by 'pbx_config' ]
>   '1' =>            1. Playback(transfer) 
> [pbx_config]
>                     2. Macro(DialExtenVM|111|30|tm) 
> [pbx_config]
>                     3. Set(EXTEN=95555555555) 
> [pbx_config]
>                     4. GoTo(Management|95555555555|1) 
> [pbx_config]
>                     5. Playback(transfer) 
> [pbx_config]
>                     6. Macro(DialExtenVM|111|30|tr) 
> [pbx_config]
>                     7. Set(EXTEN=95555555555) 
> [pbx_config]
>                     8. GoTo(Management|95555555555|1) 
> [pbx_config]
>                     9. Playback(custom/no_tech_available) 
> [pbx_config]
>                     10. Voicemail(111) 
> [pbx_config]
>   '2' =>            1. 
> Set(FAIL_MENU=main_after_hours|TIMEOUT_MENU=main_after_hours) [pbx_config]
>                     2. Goto(support_non_emergency|s|1) 
> [pbx_config]
>   '444' =>          1. Set(LIMIT_PLAYAUDIO_CALLEE=yes) 
> [pbx_config]
>                     2. Dial(SIP/111|30|mgL(10000:10000:5000)) 
> [pbx_config]
>                     3. Wait(3) 
> [pbx_config]
>                     4. Goto(main_after_hours|s|1) 
> [pbx_config]
>   '9' =>            1. 
> Set(FAIL_MENU=main_branch|TIMEOUT_MENU=main_branch) [pbx_config]
>                     2. Goto(main_branch|s|1) 
> [pbx_config]
>   'i' =>            1. GotoIf($[ ${FAIL_MENU} != ""]|?2:3) 
> [pbx_config]
>                     2. Goto(${FAIL_MENU}|s|1) 
> [pbx_config]
>                     3. Goto(main_branch|s|1) 
> [pbx_config]
>   's' =>            1. Answer() 
> [pbx_config]
>                     2. Wait(1) 
> [pbx_config]
>                     3. Background(custom/after_hours) 
> [pbx_config]
>   't' =>            1. GotoIf($[ ${TIMEOUT_MENU} != "" ]|?2:3) 
> [pbx_config]
>                     2. Goto(${TIMEOUT_MENU}|s|1) 
> [pbx_config]
>                     3. Goto(main_branch|s|1) 
> [pbx_config]
>   '_ZZZ' =>         1. 
> Macro(DialExtenVM|${EXTEN}|${DEFAULT_RING_TIME}|${DEFAULT_CALLED_TRANS}${DEFAULT_CALLER_TRANS}m) 
> [pbx_config]
> 
> 
> 
> -- 
> 
> Warm Regards,
> 
> Lee
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir