[asterisk-users] Diva Server V-BRI-2 and internal numbers

[Armin Schindler]

On Thu, 14 Dec 2006, Gregory Duchatelet wrote:
> > It looks like 107 is busy ;-)
> > Please increase verbosity, like
> >   set verbose 5
> >   capi debug
> > to see what is happening.
> 
> Hi Armin,
> 
> Verbose was at 30 :)
> 107 is not busy since i can call it from 102, which is another internal
> phone. All internal phones are busy for Asterisk...
> 
> Here is the log with verbose at 100 and capi debug enabled :
 
I should have seen that in your first email: your dialstring is
wrong. You set 'b' as callerid for that call. I assume you want to have
early-B3, so you should do
  Dial(CAPI/ISDN1/107/b)

Armin

 
>     -- Executing Dial("SIP/Greg-081f5a10", "CAPI/ISDN1/b:107||rtT") in new
> stack
>        > data = ISDN1/b:107
>        > parsed dialstring: 'ISDN1' 'b' '107' ''
>        > capi request for interface 'ISDN1'
>        > parsed dialstring: 'ISDN1' 'b' '107' ''
>   == ISDN1: Call CAPI/ISDN1/107-1e   (pres=0x00, ton=0x00)
> CONNECT_REQ ID=001 #0x1002 LEN=0047
>   Controller/PLCI/NCCI            = 0x1
>   CIPValue                        = 0x1
>   CalledPartyNumber               = <80>107
>   CallingPartyNumber              = <00 80>b
>   CalledPartySubaddress           = default
>   CallingPartySubaddress          = default
>   BProtocol
>    B1protocol                     = 0x1
>    B2protocol                     = 0x1
>    B3protocol                     = 0x0
>    B1configuration                = default
>    B2configuration                = default
>    B3configuration                = default
>    GlobalConfiguration            = default
>   BC                              = default
>   LLC                             = default
>   HLC                             = default
>   AdditionalInfo
>    BChannelinformation            = <00 00>
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
>    SendingComplete                = default
> 
>     -- Called ISDN1/b:107
>        > CAPI devicestate requested for ISDN1/107
>        > CAPI devicestate requested for ISDN1/107
> CONNECT_CONF ID=001 #0x1002 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Info                            = 0x0
> 
>     -- ISDN1: received CONNECT_CONF PLCI = 0x101
> INFO_IND ID=001 #0x11a8 LEN=0016
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x18
>   InfoElement                     = <8a>
> 
> INFO_RESP ID=001 #0x11a8 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element CHANNEL IDENTIFICATION 8a
> INFO_IND ID=001 #0x11a9 LEN=0015
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x800d
>   InfoElement                     = default
> 
> INFO_RESP ID=001 #0x11a9 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element SETUP ACK
> INFO_IND ID=001 #0x11ab LEN=0015
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x8002
>   InfoElement                     = default
> 
> INFO_RESP ID=001 #0x11ab LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element CALL PROCEEDING
>     -- CAPI/ISDN1/107-1e is proceeding passing it to SIP/Greg-081f5a10
> INFO_IND ID=001 #0x11ad LEN=0037
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x1c
>   InfoElement                     = <91 a1 13 02 02 8f> <02 01 22>0<0a a1
> 05>0<03 02 01 00 82 01 01>
> 
> INFO_RESP ID=001 #0x11ad LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element FACILITY
> INFO_IND ID=001 #0x11ae LEN=0017
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x8
>   InfoElement                     = <81 d8>
> 
> INFO_RESP ID=001 #0x11ae LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element CAUSE 81 d8
> INFO_IND ID=001 #0x11af LEN=0015
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x8045
>   InfoElement                     = default
> 
> INFO_RESP ID=001 #0x11af LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element DISCONNECT
>     -- ISDN1: Disconnect case 1
>     -- CAPI/ISDN1/107-1e is busy
>   == ISDN1: CAPI Hangingup
>     -- ISDN1: activehangingup (cause=88)
> DISCONNECT_REQ ID=001 #0x1003 LEN=0018
>   Controller/PLCI/NCCI            = 0x101
>   AdditionalInfo
>    BChannelinformation            = default
>    Keypadfacility                 = default
>    Useruserdata                   = default
>    Facilitydataarray              = default
>    SendingComplete                = default
> 
>   == Everyone is busy/congested at this time (1:1/0/0)
>     -- Executing Hangup("SIP/Greg-081f5a10", "") in new stack
>   == Spawn extension (macro-appel_sortant, s, 2) exited non-zero on
> 'SIP/Greg-081f5a10' in macro 'appel_sortant'
>   == Spawn extension (macro-appel_sortant, s, 2) exited non-zero on
> 'SIP/Greg-081f5a10'
>        > CAPI devicestate requested for ISDN1/107
>        > CAPI devicestate requested for ISDN1/107
> DISCONNECT_CONF ID=001 #0x1003 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Info                            = 0x0
> 
> INFO_IND ID=001 #0x11b1 LEN=0015
>   Controller/PLCI/NCCI            = 0x101
>   InfoNumber                      = 0x805a
>   InfoElement                     = default
> 
> INFO_RESP ID=001 #0x11b1 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>     -- ISDN1: info element RELEASE COMPLETE
> DISCONNECT_IND ID=001 #0x11b3 LEN=0014
>   Controller/PLCI/NCCI            = 0x101
>   Reason                          = 0x34d8
> 
> DISCONNECT_RESP ID=001 #0x11b3 LEN=0012
>   Controller/PLCI/NCCI            = 0x101
> 
>        > CAPI INFO 0x34d8: Incompatible destination
>   == ISDN1: Interface cleanup PLCI=0x101
> asteriskdev*CLI>
> 
> 
> 
> Greg.
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>