[asterisk-users] upgrade problem on IP phone 9133i

[shadowym]

I don't remember all the details.  I think you have to set the IP of the PC
with the TFTP client as the tftp server on the phone.  I seem to recall
something about the name of the file as well.  Again, it's quite foggy as I
did this about a year ago so sorry I can't be of more help.  I remember
getting those packet fails too until I set up all the parts correctly.  The
documentation for the phone should have all the info.  If I could figure it
out I'm sure you can. 

  _____  

From: Jean-Louis curty [mailto:jlcurty at gmail.com] 
Sent: Wednesday, August 30, 2006 2:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] upgrade problem on IP phone 9133i


good idea! 
I tried but it doesn't work either...

[08/30/06 23:12:33] UDP packet receive failed
[08/30/06 23:12:33] Invalid opcode (0) during transfer received
[08/30/06 23:12:34] Sending ' firmware.st <http://firmware.st> ' to
'192.168.0.101'
[08/30/06 23:12:34] UDP packet receive failed
[08/30/06 23:12:34] Invalid opcode (12800) during transfer received
[08/30/06 23:12:43] UDP packet receive failed 
[08/30/06 23:12:43] Invalid opcode (12800) during transfer received
[08/30/06 23:12:44] UDP packet receive failed
[08/30/06 23:12:44] Invalid opcode (12800) during transfer received
[08/30/06 23:12:53] UDP packet receive failed 
[08/30/06 23:12:53] Invalid opcode (12800) during transfer received
[08/30/06 23:12:54] UDP packet receive failed
[08/30/06 23:12:54] Invalid opcode (12800) during transfer received




2006/8/30, shadowym <shadowym at hotmail.com>: 

I think this is a known problem that was fixed in v1.3.

I think you need to do this upgrade using a 'put' install via tftp client
rather than trying to configure it to 'get' from a tftp server.  It's been
awhile so my memory is a bit foggy.  I used pumpKIN. 
http://kin.klever.net/pumpkin/



-----Original Message-----
From: Jean-Louis curty [mailto:jlcurty at gmail.com]
Sent: Wednesday, August 30, 2006 9:07 AM 
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] upgrade problem on IP phone 9133i

hi everybody,

I bought few units for evaluation but we were not able to upgrade the 
firmware to 1.4 , it's currently set at 1.2, when we go to the webadmin
page,

whether we try to change the IP of the tftp server or the firmware name and
set values, the reply is always

Invalid IP address 

Please try again

if we change the value via the phone itself , the tftp ip is changed but the
firmware does not come up ....

we are sure of our tftp server since it's used to upgrade other phones from 
other brands ....

any idea ?

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list 
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060830/cfc507a6/attachment.htm