<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=468300423-30082006><FONT face=Arial
color=#0000ff size=2>I don't remember all the details. I think you have to
set the IP of the PC with the TFTP client as the tftp server on the phone.
I seem to recall something about the name of the file as well. Again, it's
quite foggy as I did this about a year ago so sorry I can't be of more
help. I remember getting those packet fails too until I set up all the
parts correctly. The documentation for the phone should have all the
info. If I could figure it out I'm sure you
can. </FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> Jean-Louis curty
[mailto:jlcurty@gmail.com] <BR><B>Sent:</B> Wednesday, August 30, 2006 2:14
PM<BR><B>To:</B> Asterisk Users Mailing List - Non-Commercial
Discussion<BR><B>Subject:</B> Re: [asterisk-users] upgrade problem on IP phone
9133i<BR></FONT><BR></DIV>
<DIV></DIV>good idea! <BR>I tried but it doesn't work either...<BR><BR>[08/30/06
23:12:33] UDP packet receive failed<BR>[08/30/06 23:12:33] Invalid opcode (0)
during transfer received<BR>[08/30/06 23:12:34] Sending '<A
href="http://firmware.st"> firmware.st</A>' to '<A
href="http://192.168.0.101">192.168.0.101</A>'<BR>[08/30/06 23:12:34] UDP packet
receive failed<BR>[08/30/06 23:12:34] Invalid opcode (12800) during transfer
received<BR>[08/30/06 23:12:43] UDP packet receive failed <BR>[08/30/06
23:12:43] Invalid opcode (12800) during transfer received<BR>[08/30/06 23:12:44]
UDP packet receive failed<BR>[08/30/06 23:12:44] Invalid opcode (12800) during
transfer received<BR>[08/30/06 23:12:53] UDP packet receive failed <BR>[08/30/06
23:12:53] Invalid opcode (12800) during transfer received<BR>[08/30/06 23:12:54]
UDP packet receive failed<BR>[08/30/06 23:12:54] Invalid opcode (12800) during
transfer received<BR><BR><BR><BR>
<DIV><SPAN class=gmail_quote>2006/8/30, shadowym <<A
href="mailto:shadowym@hotmail.com">shadowym@hotmail.com</A>>:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">I
think this is a known problem that was fixed in v1.3.<BR><BR>I think you need
to do this upgrade using a 'put' install via tftp client<BR>rather than trying
to configure it to 'get' from a tftp server. It's been<BR>awhile so
my memory is a bit foggy. I used pumpKIN. <BR><A
href="http://kin.klever.net/pumpkin/">http://kin.klever.net/pumpkin/</A><BR><BR><BR><BR>-----Original
Message-----<BR>From: Jean-Louis curty [mailto:<A
href="mailto:jlcurty@gmail.com">jlcurty@gmail.com</A>]<BR>Sent: Wednesday,
August 30, 2006 9:07 AM <BR>To: Asterisk Users Mailing List - Non-Commercial
Discussion<BR>Subject: [asterisk-users] upgrade problem on IP phone
9133i<BR><BR>hi everybody,<BR><BR>I bought few units for evaluation but we
were not able to upgrade the <BR>firmware to 1.4 , it's currently set at 1.2,
when we go to the webadmin<BR>page,<BR><BR>whether we try to change the IP of
the tftp server or the firmware name and<BR>set values, the reply is
always<BR><BR>Invalid IP address <BR><BR>Please try again<BR><BR>if we change
the value via the phone itself , the tftp ip is changed but the<BR>firmware
does not come up ....<BR><BR>we are sure of our tftp server since it's used to
upgrade other phones from <BR>other brands ....<BR><BR>any idea
?<BR><BR>_______________________________________________<BR>--Bandwidth and
Colocation provided by <A href="http://Easynews.com">Easynews.com</A>
--<BR><BR>asterisk-users mailing list <BR>To UNSUBSCRIBE or update options
visit:<BR> <A
href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</A><BR></BLOCKQUOTE></DIV><BR></BODY></HTML>