[asterisk-users] Linksys PAP2 Ring Settings

[Daniel Salama]

That worked great!.

I was using Ring_WaveForm and I guess it's case sensitive and the  
correct form should be Ring_Waveform.

Thanks,
Daniel

On Aug 25, 2006, at 11:48 PM, Shanon Swafford wrote:

>
> This works for me on my SPA-3000 ver 3.1.10(GWd).
>
>  <Ring_Waveform>Trapezoid</Ring_Waveform>
>
> Then back to default.
>
>  <Ring_Waveform>Sinusoid</Ring_Waveform>
>
> PAP2-NA shouldn't be any different.
>
> Regards
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of  
> Daniel Salama
> Sent: Friday, August 25, 2006 6:27 PM
> To: Non-Commercial Discussion Asterisk
> Subject: [asterisk-users] Linksys PAP2 Ring Settings
>
>
> I have a few PAP2-NA that are being "mass configured" using the
> instructions on the wiki for the Sipura mass configuration.
>
> However, I need to make sure the following settings are in place as
> follow:
>
> Under the Regional Tab, I need the Ring Waveform to be Trapezoid
> instead of Sinuzoid and the Synchronized Ring to be Yes instead of
> No. I made an entry in the XML file for Synchronized_Ring which works
> just fine. However, no matter what I use for the Ring Waveform
> (Waveform, Ring_Waveform, Regional_Ring_Waveform), the setting is
> always the default (Sinuzoid). Does anyone know what the XML tag name/
> settings need to be for changing the Ring Waveform?
>
> Thanks,
> Daniel
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users