[asterisk-users] Linksys PAP2 Ring Settings

[Shanon Swafford]

This works for me on my SPA-3000 ver 3.1.10(GWd).

 <Ring_Waveform>Trapezoid</Ring_Waveform>

Then back to default.

 <Ring_Waveform>Sinusoid</Ring_Waveform>

PAP2-NA shouldn't be any different.

Regards


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Daniel Salama
Sent: Friday, August 25, 2006 6:27 PM
To: Non-Commercial Discussion Asterisk
Subject: [asterisk-users] Linksys PAP2 Ring Settings


I have a few PAP2-NA that are being "mass configured" using the  
instructions on the wiki for the Sipura mass configuration.

However, I need to make sure the following settings are in place as  
follow:

Under the Regional Tab, I need the Ring Waveform to be Trapezoid  
instead of Sinuzoid and the Synchronized Ring to be Yes instead of  
No. I made an entry in the XML file for Synchronized_Ring which works  
just fine. However, no matter what I use for the Ring Waveform  
(Waveform, Ring_Waveform, Regional_Ring_Waveform), the setting is  
always the default (Sinuzoid). Does anyone know what the XML tag name/ 
settings need to be for changing the Ring Waveform?

Thanks,
Daniel
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users