[Asterisk-Users] Re: Problem setting up TDM22B card

[somesh s]

Hi,

I know some bits about zaptel.conf and zapata.conf but

problem is modules wctdm, wcfxo, wcfxs are not getting
loaded.

modprobe zaptel is successful!

Regards,
Somesh S. Shanbhag



--- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:

> On Sun, Sep 25, 2005 at 11:50:06PM -0700, somesh s
> wrote:
> > Hi,
> > 
> > I got the following output when I run the command.
> > 
> > >>>>>>>>>>>>>>> genzaptelconf -svd
> >>>>>>>>>>>>>>>>
> > 
> > ./genzaptelconf: line 616: /etc/init.d/asterisk:
> No
> 
> The script assumes that there is an
> /etc/init.d/asterisk script.
> 
> Please stop asterisk manually.
> 
> > such file or directory
> > Unloading zaptel modules:
> > wcusb zaptel
> > Test Loading modules:
> >         -       zaptel
> >         -       zaphfc
> >         -       qozap
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wctdm
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wcfxo
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wcfxs
> >         -       pciradio
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       tor2
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       torisa
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wct1xxp
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wct4xxp
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> >       You may find more information in syslog or
> the
> > output from dmesg
> >         -       wcte11xp
> >         -       wcusb
> >         -       ztd_eth
> 
> It tries and fails to load many modules. This is
> expected, as you don't
> have their hardware.
> 
> However can you load any zaptel module using
> modprobe?
> What's the output of: 'lsmod | grep zaptel'
> 
> BTW: if you have a good idea of what should be in
> zaptel.conf and
> zapata.conf, I figure you should write them manually
> and not waste too
> much time on that automated script. It is meant to
> save time, not to
> spend time.
> 
> > Updating '/etc/default/zaptel'
> > Generating '/etc/zaptel.conf'
> > Generating '/etc/asterisk/zapata-channels.conf'
> > Reconfiguring identified channels
> >  
> > Zaptel Configuration
> > ======================
> >  
> >  
> > Channel map:
> >  
> >  
> > 0 channels configured.
> >  
> > ./genzaptelconf: line 653: /etc/init.d/asterisk:
> No
> > such file or directory
> > Checking channels configured in Asterisk:
> > ./genzaptelconf: line 665: asterisk: command not
> found
> > 
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > 
> > What may be the problem? Help me in this regard.
> > 
> > Regards,
> > Somesh S. Shanbhag
> > 
> > --- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
> > 
> > > On Sun, Sep 25, 2005 at 10:42:52PM -0700, somesh
> s
> > > wrote:
> > > > Hi,
> > > > 
> > > > Can you please give me some details about the
> link
> > > > you have sent? I am not aware of what it does?
> > > > 
> > > > [http://tzafrir.org.il/genzaptelconf]
> > > 
> > > It is a bash script for generating zaptel.conf
> and
> > > zapata.conf according
> > > to the current settings.
> > > 
> > > To use it:
> > > 
> > > wget http://tzafrir.org.il/genzaptelconf
> > > bash genzaptelconf -h # gives help
> > > 
> > > Try -s and -v . -d is probably not recommended
> if
> > > you have more thn one
> > > card, I figure.
> > > 
> > > 
> > > > 
> > > > Regards,
> > > > Somesh S. Shanbhag
> > > > 
> > > > --- Tzafrir Cohen <tzafrir at cohens.org.il>
> wrote:
> > > > 
> > > > > On Fri, Sep 23, 2005 at 06:22:06AM -0700,
> somesh
> > > s
> > > > > wrote:
> > > > > > Hi Steve,
> > > > > > 
> > > > > > This is zaptel.conf. Can you please tell
> me if
> > > you
> > > > > 
> > > > > > require to see more conf files?
> > > > > > 
> > > > > > [zaptel.conf]
> > > > > > loadzone = us
> > > > > > defaultzone=us
> > > > > > fxoks=1-2
> > > > > > fxsks=3-4
> > > > > 
> > > > > http://tzafrir.org.il/genzaptelconf
> > > > > 
> > > > > Should auto-detect zaptel.conf settings.
> Just in
> > > > > case you're not sure.
> > > > > 
> > > > > -- 
> > > > > Tzafrir Cohen         |
> > > tzafrir at jbr.cohens.org.il |
> > > > > VIM is
> > > > > http://tzafrir.org.il |                     
>  
=== message truncated ===



	
		
______________________________________________________ 
Yahoo! for Good 
Donate to the Hurricane Katrina relief effort. 
http://store.yahoo.com/redcross-donate3/