[Asterisk-Users] Fedora Core 4 not recognizing X100P cards

Tue Sep 13 13:29:10 MST 2005

My TDM400 on fc4 was working great..
all of sudden ..i am having the same issue ..you guys are having
all i tried to run asterisk as non-root user.. and I was able to run it as
non-root
and was able to receive and send call using asterisk..

I am not sure.. what thing I did wrong and coz all the trouble..

Thanks

> -----Original Message-----
> From: alex at linux.org.pe
> Sent: Tue, 13 Sep 2005 15:09:52 -0500
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Fedora Core 4 not recognizing X100P cards
>
>
> I have the same problem.
>
> I've been having a bit of trouble getting the cards to work with
> asterisk, and I thought perhaps you might know what I might be doing
> wrong. I installed them in a linux box, and when I check to see if the
> OS has recognized them it looks fine:
>
> They show up as HSP56 MicroModem (rev 04)
>
> [root at asterisk2][~> lspci
> 00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host
> Bridge
> (MCH) (rev 04)
> 00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP
> Bridge (rev
> 04)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
> 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
> 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04)
> 00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev
> 04)
> 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
> Audio
> (rev 04)
> 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
> 4000 AGP
> 8x] (rev c1)
> 02:01.0 USB Controller: NEC Corporation USB (rev 41)
> 02:01.1 USB Controller: NEC Corporation USB (rev 41)
> 02:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
> 02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
> 02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev 04)
> 02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
> 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
> (rev 78)
> 02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
>
>
> But when I try to start the wcfxo module it doesn't work:
>
> [root at asterisk2][~> modprobe wcfxo
> Notice: Configuration file is /etc/zaptel.conf
> line 146: Unable to open master device '/dev/zap/ctl'
>
>
> And the linux kernel doesn't quite recognize them:
>
> Sep  6 18:58:45 asterisk2 kernel: zaptel: no version for
> "struct_module" found: kernel tainted.
> Sep  6 18:58:45 asterisk2 kernel: Zapata Telephony Interface Registered
> on major 196
>
>
> When I try to configure the ztcfg it doesn't find anything on channel 1:
>
>
> [root at asterisk2][~> /sbin/ztcfg -vvv
>
> Zaptel Configuration
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
> 4 channels configured.
>
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>
>
> And Asterisk can't get them working:
>
>   [chan_zap.so] => (Zapata Telephony)
>    == Parsing '/etc/asterisk/zapata.conf': Found
> Sep  6 19:01:34 WARNING[2549]: chan_zap.c:778 zt_open: Unable to
> specify channel
> 1: No such device or address
> Sep  6 19:01:34 ERROR[2549]: chan_zap.c:6239 mkintf: Unable to open
> channel 1:
> No such device or address
> here = 0, tmp->channel = 1, channel = 1
> Sep  6 19:01:34 ERROR[2549]: chan_zap.c:9191 setup_zap: Unable to
> register
> channel '1-4'
> Sep  6 19:01:34 WARNING[2549]: loader.c:345 ast_load_resource:
> chan_zap.so:
> load_module failed, returning -1
>    == Unregistered channel type 'Tor'
>    == Unregistered channel type 'Zap'
> Sep  6 19:01:34 WARNING[2549]: loader.c:440 load_modules: Loading module
> chan_zap.so failed!
>
>
> I've tried most of the pci cards and they all give the same result.
> When using a different type of card in that same PC i don't get those
> errors. I thought perhaps there is some software upgrade necessary for
> them to work, or something along those lines? Any help you could mention
> would be very appreciated. Thanks
>
>
> --
> Ing CIP Alejandro Celi Mariátegui
> <alex at linux.org.pe>
>
>
> El mar, 13-09-2005 a las 15:01, Mojo with Horan & Company, LLC escribió:
> > hisax seems to be a loadable module for an ISDN card.  if:
> >
> > # lsmod | grep hisax
> >
> > prints any output, try
> >
> > # rmmod hisax; modprobe zaptel
> >
> > ?
> >
> > hth
> > Mojo
> >
> > Shawn Porter wrote:
> > > I am getting quite frustrated today, so please bear with me.
> > >
> > > I just installed Fedora Core 4 (was running RedHat 9 with a  working
> > > Asterisk)
> > >
> > > now my Fedora does not appear to be recognizing my X100P (clone) at
> all.
> > >
> > >
> > >
> > > Hardware browser just shows them as unknown device.  driver: hisax
> > >
> > > So, of course, my zaptel drivers do not work and therefore my
> asterisk
> > > does not work.
> > >
> > >
> > >
> > > any help would be greatly appreciated…..
> > >
> > >
> > >
> > > Shawn
> > >
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation sponsored by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users