[Asterisk-Users] Fedora Core 4 not recognizing X100P cards

Tue Sep 13 13:09:52 MST 2005

I have the same problem.

I've been having a bit of trouble getting the cards to work with
asterisk, and I thought perhaps you might know what I might be doing
wrong. I installed them in a linux box, and when I check to see if the
OS has recognized them it looks fine:

They show up as HSP56 MicroModem (rev 04)

[root at asterisk2][~> lspci
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host
Bridge
(MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP 
Bridge (rev
04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev
04)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
Audio
(rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 
4000 AGP
8x] (rev c1)
02:01.0 USB Controller: NEC Corporation USB (rev 41)
02:01.1 USB Controller: NEC Corporation USB (rev 41)
02:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev 04)
02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] 
(rev 78)
02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)

But when I try to start the wcfxo module it doesn't work:

[root at asterisk2][~> modprobe wcfxo
Notice: Configuration file is /etc/zaptel.conf
line 146: Unable to open master device '/dev/zap/ctl'

And the linux kernel doesn't quite recognize them:

Sep  6 18:58:45 asterisk2 kernel: zaptel: no version for 
"struct_module" found: kernel tainted.
Sep  6 18:58:45 asterisk2 kernel: Zapata Telephony Interface Registered 
on major 196

When I try to configure the ztcfg it doesn't find anything on channel 1:

[root at asterisk2][~> /sbin/ztcfg -vvv

Zaptel Configuration
======================

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

And Asterisk can't get them working:

  [chan_zap.so] => (Zapata Telephony)
   == Parsing '/etc/asterisk/zapata.conf': Found
Sep  6 19:01:34 WARNING[2549]: chan_zap.c:778 zt_open: Unable to 
specify channel
1: No such device or address
Sep  6 19:01:34 ERROR[2549]: chan_zap.c:6239 mkintf: Unable to open
channel 1:
No such device or address
here = 0, tmp->channel = 1, channel = 1
Sep  6 19:01:34 ERROR[2549]: chan_zap.c:9191 setup_zap: Unable to
register
channel '1-4'
Sep  6 19:01:34 WARNING[2549]: loader.c:345 ast_load_resource:
chan_zap.so:
load_module failed, returning -1
   == Unregistered channel type 'Tor'
   == Unregistered channel type 'Zap'
Sep  6 19:01:34 WARNING[2549]: loader.c:440 load_modules: Loading module
chan_zap.so failed!

I've tried most of the pci cards and they all give the same result. 
When using a different type of card in that same PC i don't get those
errors. I thought perhaps there is some software upgrade necessary for
them to work, or something along those lines? Any help you could mention
would be very appreciated. Thanks

-- 
Ing CIP Alejandro Celi Mariátegui 
<alex at linux.org.pe>

El mar, 13-09-2005 a las 15:01, Mojo with Horan & Company, LLC escribió:
> hisax seems to be a loadable module for an ISDN card.  if:
> 
> # lsmod | grep hisax
> 
> prints any output, try
> 
> # rmmod hisax; modprobe zaptel
> 
> ?
> 
> hth
> Mojo
> 
> Shawn Porter wrote:
> > I am getting quite frustrated today, so please bear with me.
> > 
> > I just installed Fedora Core 4 (was running RedHat 9 with a  working 
> > Asterisk)
> > 
> > now my Fedora does not appear to be recognizing my X100P (clone) at all.
> > 
> >  
> > 
> > Hardware browser just shows them as unknown device.  driver: hisax
> > 
> > So, of course, my zaptel drivers do not work and therefore my asterisk 
> > does not work.
> > 
> >  
> > 
> > any help would be greatly appreciated…..
> > 
> >  
> > 
> > Shawn
> > 
> >  
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users