[Asterisk-Users] pri gateway

[Rob Lith]

And to make life more interesting in Cape Town South Africa our Telco have 
crc4 off by default and in Johannesburg on by default. They use Siemens 
switchs in Jhb and Alcatel in the Cape.

Rob

On 9/9/05, Sander <crombeen at rommelweb.nl> wrote:
> 
> Not all providers use crc4 you can try to remove the entry
> 
> -----Oorspronkelijk bericht-----
> Van: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] Namens altus
> Verzonden: vrijdag 9 september 2005 7:24
> Aan: Baris Simsek
> CC: asterisk
> Onderwerp: Re: [Asterisk-Users] pri gateway
> 
> These are my configs for a sangoma 4 port connected to E1's in the UK
> 
> loadzone = us
> loadzone=uk
> defaultzone=uk
> 
> span=1,1,0,ccs,hdb3,crc4
> span=2,1,0,ccs,hdb3,crc4
> span=3,1,0,ccs,hdb3,crc4
> span=4,1,0,ccs,hdb3,crc4
> 
> 
> # card 0 - span 1
> bchan=1-15,17-31
> dchan=16
> 
> # card 0 - span 2
> bchan=32-46,48-62
> dchan=47
> 
> # card 0 - span 3
> bchan=63-77,79-93
> dchan=78
> 
> # card 0 - span 4
> bchan=94-108,110-124
> dchan=109
> 
> and zapata.conf
> [channels]
> context=default
> switchtype=euroisdn
> pridialplan=unknown
> prilocaldialplan=unknown
> priindication = outofband
> usecallerid=yes
> hidecallerid=no
> restrictcid=no
> usecallingpres=yes
> callwaitingcallerid=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> callgroup=1
> pickupgroup=1
> 
> ; card 0 - span 1
> switchtype = euroisdn
> signalling = pri_cpe
> group = 1
> context = incoming
> channel => 1-15,17-31
> 
> ; card 0 - span 2
> switchtype = euroisdn
> signalling = pri_cpe
> group = 1
> context = incoming
> channel => 32-46,48-62
> 
> ; card 0 - span 3
> switchtype = euroisdn
> signalling = pri_cpe
> group = 1
> context = incoming
> channel => 63-77,79-93
> 
> ; card 0 - span 4
> switchtype = euroisdn
> signalling = pri_cpe
> group = 1
> context = incoming
> channel => 94-108,110-124
> 
> 
> Maybe its your telco??
> 
> 
> On Thu, 2005-09-08 at 15:23 +0300, Baris Simsek wrote:
> > hi,
> >
> > my asterisk version is 1.0.9
> >
> > /etc/zaptel.conf
> > span=1,1,0,ccs,hdb3,crc4
> > bchan=1-15
> > dchan=16
> > bchan=17-31
> >
> > it is comfortable with Turkish Telecom. i tried before and it works.
> >
> > /etc/asterisk/zapata.conf
> > [channels]
> > switchtype=euroisdn
> > signalling=pri_cpe
> > context=incoming
> > group=1
> > channel=>1-15,17-31
> >
> > Leds are lighting at start. When i run /etc/init.d/zaptel they go out.
> > And i can see the modules are installed. and i see that, layer 1 is
> > going up after zaptel. So i am sure there is no problem with drivers.
> > I think it is connected to asterisk. any idea? thanks...
> >
> > altus wrote:
> >
> > >what about a copy of your zapata.conf and zaptel.conf,what color is
> > >the leds
> > >
> > >On Thu, 2005-09-08 at 12:42 +0300, Baris Simsek wrote:
> > >
> > >
> > >>hello,
> > >>
> > >>i installed an asterisk as a pri gateway. Everything is okay.
> > >>/etc/init.d/zaptel starts successfull with wct4xxp module.
> > >>/etc/init.d/asterisk starts also successfully. I tested my pri cable
> > >>and it works. But still my span isn't up. I don't see any error. Do
> > >>you have any idea? What else i should check? Thanks.
> > >>
> > >>My card is 4 span Wildcard TE410P
> > >><http://www.digium.com/index.php?menu=product_detail&category=hardwa
> > >>re&product=TE410P>
> > >>
> > >># lsmod
> > >>wct4xxp 106688 62
> > >>zaptel 226820 129 wct4xxp
> > >>
> > >># asterisk -r
> > >>gw*CLI> pri show span 1
> > >>Primary D-channel: 16
> > >>Status: Provisioned, In Alarm, Down, Active
> > >>Switchtype: EuroISDN
> > >>Type: CPE
> > >>Window Length: 0/7
> > >>Sentrej: 0
> > >>SolicitFbit: 0
> > >>Retrans: 0
> > >>Busy: 0
> > >>Overlap Dial: 0
> > >>T200 Timer: 1000
> > >>T203 Timer: 10000
> > >>T305 Timer: 30000
> > >>T308 Timer: 4000
> > >>T313 Timer: 4000
> > >>N200 Counter: 3
> > >>
> > >>
> >
> >
> >
> --
> 
> Thanks
> Altus Snyman
> Stormcorp Network Solutions
> +27 11 8071141 exten 301
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050909/4efe6413/attachment.htm