[Asterisk-Users] Asterisk overheating on VIA Epia MSeriesmoth erboard

[Remco Barende]

Just out of interest, how do you run the VIA boards? They only have one 
network connection and if you add a PRI card you cannot have both a LAN 
and NET connection?

(Highly offtopic, sorry!)


On Tue, 6 Sep 2005, Nathan C. Smith wrote:

> Is that a bios setting (I don't recall seeing it) or an OS setting?
>
> I run a lot of Via C3 machines (they are so nifty) but don't remember seeing
> this.
>
>
> -----Original Message-----
> From: Technical Support [mailto:support at ocg.ca]
> Sent: Tuesday, September 06, 2005 10:43 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion';
> shmaltz at gmail.com
> Subject: RE: [Asterisk-Users] Asterisk overheating on VIA Epia
> MSeriesmotherboard
>
>
> You can dramatically reduce the heat from your EPIA board by turning on CPU
> scaling!  Once we turned it on, the heatsink was cool to the touch.  (Even
> with asterisk running).
>
> MD
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>