[Asterisk-Users] Asterisk overheating on VIA Epia MSeriesmotherboard

[Technical Support]

BIOS change won't matter - the OS overrides it.  You will have to tell Linux
to use the feature.  See the Via web site for instructions.

MD


-----Original Message-----
From: Nathan C. Smith [mailto:smith at ipmvs.com] 
Sent: Tuesday, September 06, 2005 12:11 PM
To: 'Asterisk Users Mailing List - Non-CommercialDiscussion'
Subject: RE: [Asterisk-Users] Asterisk overheating on VIA Epia
MSeriesmotherboard

Is that a bios setting (I don't recall seeing it) or an OS setting?

I run a lot of Via C3 machines (they are so nifty) but don't remember seeing
this.


-----Original Message-----
From: Technical Support [mailto:support at ocg.ca]
Sent: Tuesday, September 06, 2005 10:43 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion';
shmaltz at gmail.com
Subject: RE: [Asterisk-Users] Asterisk overheating on VIA Epia
MSeriesmotherboard


You can dramatically reduce the heat from your EPIA board by turning on CPU
scaling!  Once we turned it on, the heatsink was cool to the touch.  (Even
with asterisk running).

MD