[Asterisk-Users] Teliax users, g729 question

[John Reynolds]

Chris,

Thanks also for your response... That is one of the first things I checked...

> >> I have checked, double checked, triple checked my account with teliax,
> >> and made sure that the g729 box is checked for both sip and iax.

Thanks again,

JR

On 10/8/05, Chris Coulthurst <asterisk at shuksan.com> wrote:
> Make sure you have g729 turned on from the Teliax customer panel on their
> website.
>
> Chris Coulthurst
> chris at shuksan.com
>
>
> ----- Original Message -----
> From: "Rich Adamson" <radamson at routers.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>; "John Reynolds" <reynoldsjc at gmail.com>
> Sent: Saturday, October 08, 2005 8:59 AM
> Subject: Re: [Asterisk-Users] Teliax users, g729 question
>
>
> >> I am using Teliax to terminate my calls, and I have 3 licenses' for
> >> g729 from Digium. "show translations" verifies that the registration
> >> took place.
> >>
> >> When I place a call, having "allow=g729" as the only allow option in
> >> iax.conf, I get the following error:
> >>
> >> WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by
> >> 208.139.204.228: Unable to negotiate codec
> >>
> >> If I place a call with g726 as the only allow line, then the call
> >> completes as desired. I realize I could just use that (g726), but
> >> it seems odd that I cannot connect using g729 when both of us support
> >> it.
> >>
> >> I have checked, double checked, triple checked my account with teliax,
> >> and made sure that the g729 box is checked for both sip and iax. I
> >> have also contacted support, they have responded, but not with
> >> anything that would be considered helpful.
> >>
> >> My question then to you all is this: Are you connecting to Teliax via
> >> g729? if so, how... what are you doing that I might be missing?
> >>
> >> Your guidance will be most appreciated.
> >
> > I just tried g729 with teliax this morning. It worked fine in both
> > directions using three different did's from them.  I did have one
> > test call where audio was one way though.
> >
> > During those test calls I watched the CLI and the calls definitely
> > were g729 without a doubt. I used the exact same teliax server you
> > show above.
> >
> > I'm running cvs-head from yesterday.
> >
> > If you do a iax2 debug, you should be able to spot which system is
> > not compat with g729. That should lead you into diagnosing the
> > problem a little deeper.
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> >
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>